Hoover Junior Bag Filtration Upgrade

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

alexhoovers94

Well-known member
Joined
Feb 22, 2012
Messages
3,221
Location
Manchester UK
Yesterday I decided to try and fit a Numatic Hepa-flo bag onto my Hoover Junior U1012 so I took the plastic face plate off the Hepa-flo bag and pushed it onto the Juniors top fill tube so now it will technically have HEPA filtration...

alexhoovers94++8-25-2013-14-54-31.jpg
 
Sam, I tried it and it works!...

I forgot you suggested this, so I thought I would try it. I tried to put it straight onto the fill tube out of the box and it wouldn't fit, the entire opening seemed to be the size of the fill tube but it would not go on, so I pealed the rubber seal bag and I saw this...


It is exccess of the bag from where the plastic face plate is stook on.

alexhoovers94++8-28-2013-18-16-38.jpg
 
It was causing to much tightness for the hole I was trying to put it into (don't I know it!!!!) so I snipped into it all the way around with scissors so it would peal back when I pushed the bag on.

alexhoovers94++8-28-2013-18-19-30.jpg
 
Here is a close up of how the bag is fitted to the fill tube and you can see I pushed the bags sealing tab back against the body of the machine so it is out of the way.

alexhoovers94++8-28-2013-18-21-58.jpg
 

Latest posts

Back
Top