ilovehoovers
Well-known member
What is your favorite brand that still uses old designs? The Workhorse is a good example
What is your favorite brand that still uses old designs?
- Thread starter ilovehoovers
- Start date
Help Support VacuumLand:
Does this count?
I have a Gtech Pro 2, and I think it's design is a bit like a vintage Pinnock Premier vacuum from Australia. The bag seems to hang from a slot which lets you see the dirt in the bag, and the airflow works diagonally towards the motor, like how the Pinnock worked, which at the time was called cyclonic action.
The Pro 2 design is quite familiar, the difference being the Pro 2 is handheld, the Pinnock Premier was a cylinder. But I think it's still pretty amazing how a cordless vacuum of today that is bagged was made only slightly like a rare vintage. Quite remarkable.
I have a Gtech Pro 2, and I think it's design is a bit like a vintage Pinnock Premier vacuum from Australia. The bag seems to hang from a slot which lets you see the dirt in the bag, and the airflow works diagonally towards the motor, like how the Pinnock worked, which at the time was called cyclonic action.
The Pro 2 design is quite familiar, the difference being the Pro 2 is handheld, the Pinnock Premier was a cylinder. But I think it's still pretty amazing how a cordless vacuum of today that is bagged was made only slightly like a rare vintage. Quite remarkable.
human
Well-known member
Yes, definitely Kirby and Sanitaire. I would add Aerus (formerly Electrolux USA) to the list but they discontinued their classic metal canisters some time ago.
compuvac
Well-known member
- Joined
- Jul 15, 2020
- Messages
- 134
Henry!
Henry and other Numatic machines have not really changed much since their introduction in the 1980's.
Of course there have been small internal & external tweaks like the parking bracket, 3D face & introduction of smaller buckets but the design stays very similar in fact you can put a 2020 HVR200 head on a 1980 HVC base.
Credits to Beko1987 for picture. oldhoovers.blogspot.com
https://oldhoovers.blogspot.com/2018/07/numatic-henry-hvr200-brochure-2001.html
Henry and other Numatic machines have not really changed much since their introduction in the 1980's.
Of course there have been small internal & external tweaks like the parking bracket, 3D face & introduction of smaller buckets but the design stays very similar in fact you can put a 2020 HVR200 head on a 1980 HVC base.
Credits to Beko1987 for picture. oldhoovers.blogspot.com
https://oldhoovers.blogspot.com/2018/07/numatic-henry-hvr200-brochure-2001.html
sanitaire
Well-known member
hoover conquest and guardsman
Hoover Convertible for me
naturally.
I first used a Hoover Guardsman in the seminary, and later, a church. Strong, powerful machines!
naturally.
I first used a Hoover Guardsman in the seminary, and later, a church. Strong, powerful machines!
human
Well-known member
I believe Hoover still makes a commercial vacuum based on the old Convertible design but I seem to remember reading on here a few months ago that it was being discontinued.
another classic design with staying power that I had initially forgotten about is the twin-motor Electrolux upright that debuted as the Discovery II lives on under Aerus and a couple of other brands, both for commercial and household applications.
another classic design with staying power that I had initially forgotten about is the twin-motor Electrolux upright that debuted as the Discovery II lives on under Aerus and a couple of other brands, both for commercial and household applications.
panasonicvac
Well-known member
TTI has moved on from the Hoover Guardsman (Convertible) and the Conquest, they are both long gone.
Speaking of which, my favorite would be the blue Oreck XL Commercial. They have been making this exact same model ever since I was a kid without making any changes to it. Well at one point they did changed the outer bag before going back to the one that they had been using previously.
Speaking of which, my favorite would be the blue Oreck XL Commercial. They have been making this exact same model ever since I was a kid without making any changes to it. Well at one point they did changed the outer bag before going back to the one that they had been using previously.
huskyvacs
Well-known member
I've never used one - but for you industrial vacuum fanatics, the NSS M1 "Pig" is still unchanged.
Kirby, when they recycled the 516/Sanitronic motor design for the American Lincoln Super Sweep from 1968-1982, the similar Super-Vac 180 from 1982-1985, and the COMVAC 1300 also from 1982-1985.
~Ben
~Ben
@kirbyclassiciii
I've always thought that the Dual Sanitronic 50 would be the ultimate commercial machine. It's lightweight, durable as heck, and a great performer. Plus it's the first model to have increased power through a higher speed if you need to use a hose. It would be even better with an actual beater, an upgraded motor (for a bit more power), an option for F-type Kirby disposable HEPA bags and the near-indestructible Amodel fan.
I could have sworn that the housekeeping department of this motor lodge outside my hometown had Dual 50's (could have been Sanitronic VII/562 too) on their maid carts -- this was in the early 2000's. I don't think I mistook them for Royals (which were still being produced) as they definitely had a tan bag and my grandma had a Dual 50 which looked identical to what they were using. Unfortunately, this motor lodge is long gone (the main part of the motor lodge burned down about five years ago, only one small building of rooms are left and it's boarded up). They were probably still using them up to the fire. I wonder if they purchased them new or if they happened to buy them slightly used from a vac dealer? This was the first and only time I've seen a Kirby being used for commercial use.
I've always thought that the Dual Sanitronic 50 would be the ultimate commercial machine. It's lightweight, durable as heck, and a great performer. Plus it's the first model to have increased power through a higher speed if you need to use a hose. It would be even better with an actual beater, an upgraded motor (for a bit more power), an option for F-type Kirby disposable HEPA bags and the near-indestructible Amodel fan.
I could have sworn that the housekeeping department of this motor lodge outside my hometown had Dual 50's (could have been Sanitronic VII/562 too) on their maid carts -- this was in the early 2000's. I don't think I mistook them for Royals (which were still being produced) as they definitely had a tan bag and my grandma had a Dual 50 which looked identical to what they were using. Unfortunately, this motor lodge is long gone (the main part of the motor lodge burned down about five years ago, only one small building of rooms are left and it's boarded up). They were probably still using them up to the fire. I wonder if they purchased them new or if they happened to buy them slightly used from a vac dealer? This was the first and only time I've seen a Kirby being used for commercial use.
Answer
I have the American Lincoln super sweep. I want to crush this rumor right now.
The kirby f@g exhaust is closet to three inches. It will not perform with type f setup. The outer bag releases no air. If you put a f&g hepa that's the only route.
If you got a cb motor put a single a Speed 6 amp coil from a royal it would probably fit.
The airflow on my super sweep is quite impressive.
I have the American Lincoln super sweep. I want to crush this rumor right now.
The kirby f@g exhaust is closet to three inches. It will not perform with type f setup. The outer bag releases no air. If you put a f&g hepa that's the only route.
If you got a cb motor put a single a Speed 6 amp coil from a royal it would probably fit.
The airflow on my super sweep is quite impressive.
Similar threads
Latest posts
-
-
-
Anyone else think the pre "ball" Dysons had better Bin/Cyclone designs?
- Latest: rlsellman21
-
-
-
-
