Does anyone with a large knowledge of Kirby information post-Sanitronic VII know anything about part numbers for the "Mark V" Handi-Butler (no Handi-Sharpener or wire wheels) used on the Classic III, Tradition and Heritage, especially the jig saw accessory and blades?
To get this ball rolling, here is all the HB part numbers I know (please feel free to correct me if necessary):
141279S - speed switch connector pin (early Tradition)
400073 - HB body shell (Classic Omega, Classic III, Tradition)
400081 - HB body shell (Heritage)
402376S - HB jack shaft spindle
402558 - HB jack shaft end cover
4027 - HB pulley lock pin
404076S - HB body cover, red (Classic III)
404079S - HB body cover, blue (Tradition)
404081S - HB body cover, gray (Heritage)
405058 - HB belt
408076 - HB assembly screw
412062S - HB rubber disc assembly
412662S - HB sandpaper, set of 3
4140 - HB lamb's wool pad
419058 - HB wrench
420062S - HB flannel buffing wheel, soft
422062S- HB sewn buffing wheel, hard
4240 - HB polishing stick, coarse
4260 - HB polishing stick, fine
427062 - HB drill chuck
428076S - HB wheel cup stands, red (Classic III)
428079S - HB wheel cup stands, blue (Tradition)
428081S - HB wheel cup stands, gray (Heritage)
417460 - Flexible shaft core
417560 - Flexible shaft spindle, 1/2"
417676 - Flexible shaft casing, red (Classic III)
417679 - Flexible shaft casing, blue (Tradition)
417681 - Flexible shaft casing, gray (Heritage)
418160 - Flexible shaft nut, 1/2", RH
Thank you,
Ben
To get this ball rolling, here is all the HB part numbers I know (please feel free to correct me if necessary):
141279S - speed switch connector pin (early Tradition)
400073 - HB body shell (Classic Omega, Classic III, Tradition)
400081 - HB body shell (Heritage)
402376S - HB jack shaft spindle
402558 - HB jack shaft end cover
4027 - HB pulley lock pin
404076S - HB body cover, red (Classic III)
404079S - HB body cover, blue (Tradition)
404081S - HB body cover, gray (Heritage)
405058 - HB belt
408076 - HB assembly screw
412062S - HB rubber disc assembly
412662S - HB sandpaper, set of 3
4140 - HB lamb's wool pad
419058 - HB wrench
420062S - HB flannel buffing wheel, soft
422062S- HB sewn buffing wheel, hard
4240 - HB polishing stick, coarse
4260 - HB polishing stick, fine
427062 - HB drill chuck
428076S - HB wheel cup stands, red (Classic III)
428079S - HB wheel cup stands, blue (Tradition)
428081S - HB wheel cup stands, gray (Heritage)
417460 - Flexible shaft core
417560 - Flexible shaft spindle, 1/2"
417676 - Flexible shaft casing, red (Classic III)
417679 - Flexible shaft casing, blue (Tradition)
417681 - Flexible shaft casing, gray (Heritage)
418160 - Flexible shaft nut, 1/2", RH
Thank you,
Ben