Hoover Senso...

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

kirbymodel2c

Well-known member
Joined
Sep 23, 2006
Messages
1,836
Location
Nottingham, England
Hi, I was donated this Hoover Sensotronic S3134.
I've not had time to look at it properly yet.
It needs a bit of a clean and polish. I'm sure it will look fine once it's finished.
I was suprised at how long the neck is on the straight suction head is:o)

James:o)

kirbymodel2c++10-22-2012-09-50-34.jpg
 
What a beauty! This must be from the first series of Sensontronic's as I'm sure the later electronic models came with a black hose and a chrome extension wands? If it is, it's certainly a rare bird.
 
Hi Chris

Hi Chris, I think it is from the 1st series of Hoover Sensotronics.
Well I thought I'd rescue it as it would of been going to the tip if I didn't want it. Had to travel to collect it.
I was given a Siemens vac as well which I didn't want as I already have one but I took that as well so I could give it to another young collector who said he would be interested in it:o)

James:o)
 
I would like to suggest that the long neck was to compensate for the shorter hose handle, as all other Sensortronic cleaners with none-power hoses had a regular sized neck on the floor tool and a long hose handle. On later cleaners across all ranges where the hose terminated into a looped handle shaped like an iron, the extension tubes were longer than those supplied on cleaners which had the regular long hose handle. Then again, I tell you this, but I must also say that some if not all Powerglide cleaners had a long necked floor tool, despite having a long hose handle too. That was the only other model I can think of which did have such, though.
 
senso....

james,
so have you used the senso yet? i've always een intrigued to know what they're like to use. it it quiet? for some reason i imagined it to be quite quiet!
thedysonman
 
for some reason i imagined it to be quite quiet

The Sensotronics are pretty quiet, with strong suction. They're also probably one of the heaviest domestic cylinders ever made, weighing in at 10kg. 



 
As well as being heavy to lift, the long and wide design as well as the weight was such that the cleaner was also very hard to pull around. It would not have been so bad had the cleaner had a swivel top hose, or at the least a hose which was fitted high up, like on a Philips. But as it was, the low hose point made it even harder to pull.
 
Hoover Powerglide cylinder

I had a "Powerglide", model S4256, in red with black tools and hose. It had the conventional short-necked floor head, standard length extension tubes and standard hose hand-grip.
 
Hello Rolls. The model I had in mind was beige with brown tools, with a brown floor tool and long neck. It was brought into my shop for repair. Very well looked after and still in the original box. I am wondering if the colour of the tool kit was a factor in the choice of floor tool provided? I would not be at all surprised if Hoover were in the process of exhausting stock of the brown tools as it would have been around the time of the Powerglide cleaner that both brown and beige & brown trim tool kits were discontinued in favour of plain black. Do you know if the beige Powerglide cleaner was an earlier model or did it run alongside of the red version as a colour choice?
 
Just finished cleaning this 1982 Sensotronic System 1 up for Ric Gooch. Although its the most basic one, its by far my favourite. That blood red colour is incredible. Will do a vid of it tomorrow

ryry_87++10-25-2012-17-22-59.jpg
 

Latest posts

Back
Top