vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
Rowenta Silence Force RO4723
Christmas wish-list...
- Thread starter DysonAnimal
- Start date
Help Support VacuumLand:
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
Siemens Dynapower XXL VS08G2499...
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
Siemens Extreme Power Z3.0 VSZ3XTRM...
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
Philips Performer FC9170/01...
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
AEG-Electrolux Maximus AMX 7025...
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
Hey tanks Joe
I also wanted so bad a TOL AEG-Electrolux Ultraone like the one that Jack has shown in the first post or a Nilfisk GM80 but they're very expensive, maybe the next year.
Anyway I'll be happy as a child with a candy with one of those 8)
I also wanted so bad a TOL AEG-Electrolux Ultraone like the one that Jack has shown in the first post or a Nilfisk GM80 but they're very expensive, maybe the next year.
Anyway I'll be happy as a child with a candy with one of those 8)
kirbyeureka95
Well-known member
- Joined
- Jul 27, 2010
- Messages
- 294
the AEG maximus is cool ive never seen something like it with the combo tool on the handle and a turbo nozzle and crevice in a tool compartment
DysonAnimal
Well-known member
- Joined
- Oct 5, 2010
- Messages
- 348
Happy New Year, everyone!
Glad to see people have continued to contribute to this thread, and aside from the usual attention-seeker, everyone has managed to keep to the spirit with with it was intended!
Happy to say I've now acquired two of the cleaners from my wishlist (which I'll share in the next few days)... did anyone else get any of theirs over the Christmas period? If so, let's see some photos!
Glad to see people have continued to contribute to this thread, and aside from the usual attention-seeker, everyone has managed to keep to the spirit with with it was intended!
Happy to say I've now acquired two of the cleaners from my wishlist (which I'll share in the next few days)... did anyone else get any of theirs over the Christmas period? If so, let's see some photos!
DysonAnimal
Well-known member
- Joined
- Oct 5, 2010
- Messages
- 348
A cautionary tale...
Prompted by the discussion of the Hoover Freemotion above, I bought a brand new replacement for the one I used to own from Amazon just before Christmas. It was on offer for considerably less than it's RRP, and I wondered if maybe I'd just been unlucky with my previous one.
It arrived, I took it out of the box, snapped a few photos, then took it into the dining room to try it out. And encountered a problem... as you can hear from the video below, the 4 gaskets around the dustbox fail to make an airtight seal, so the cleaner shrieks when you try and use it on the higher power settings. I considered contacting Hoover's customer service dept. to get a replacement, but after hearing from two friends, both of whom had encountered exactly the same problem with exactly the same cleaner, I returned it to Amazon for a full refund!
<object width=640 height=505><param name=movie value=></param><param name=allowFullScreen value=true></param><param name=allowscriptaccess value=always></param><embed src= type=application/x-shockwave-flash allowscriptaccess=always allowfullscreen=true width=640 height=505></embed></object>
Prompted by the discussion of the Hoover Freemotion above, I bought a brand new replacement for the one I used to own from Amazon just before Christmas. It was on offer for considerably less than it's RRP, and I wondered if maybe I'd just been unlucky with my previous one.
It arrived, I took it out of the box, snapped a few photos, then took it into the dining room to try it out. And encountered a problem... as you can hear from the video below, the 4 gaskets around the dustbox fail to make an airtight seal, so the cleaner shrieks when you try and use it on the higher power settings. I considered contacting Hoover's customer service dept. to get a replacement, but after hearing from two friends, both of whom had encountered exactly the same problem with exactly the same cleaner, I returned it to Amazon for a full refund!
<object width=640 height=505><param name=movie value=></param><param name=allowFullScreen value=true></param><param name=allowscriptaccess value=always></param><embed src= type=application/x-shockwave-flash allowscriptaccess=always allowfullscreen=true width=640 height=505></embed></object>
DysonAnimal
Well-known member
- Joined
- Oct 5, 2010
- Messages
- 348
Sebo Felix
Found a picture of the Sebo Felix Premium Navy I used to own - from a set of pics I took for the eBay listing when I sold it.
I wasn't keen on the hose set-up, but no complaints about use or performance in upright mode. I *personally* find this manual-with-guidance height adjustment system vastly superior to the automatic adjustment on the X-Series machines, but that's just my preference. Brushroll's a bit aggressive for some looped-pile carpeting, but aside from that, a great cleaner!
Found a picture of the Sebo Felix Premium Navy I used to own - from a set of pics I took for the eBay listing when I sold it.
I wasn't keen on the hose set-up, but no complaints about use or performance in upright mode. I *personally* find this manual-with-guidance height adjustment system vastly superior to the automatic adjustment on the X-Series machines, but that's just my preference. Brushroll's a bit aggressive for some looped-pile carpeting, but aside from that, a great cleaner!
djtaylor
Well-known member
Wish list
My wish list would include
New
-1 Kirby Sentria
-2 Rainbow E2
-3 Filter Queen 360
Vintage
-1 Several Kirby D50s and D80s
-2 A Bison or two
-3 Hoover 28
My Undying love to anybody who fills even part of this wish list... any takers? No? Oh, well...
My wish list would include
New
-1 Kirby Sentria
-2 Rainbow E2
-3 Filter Queen 360
Vintage
-1 Several Kirby D50s and D80s
-2 A Bison or two
-3 Hoover 28
My Undying love to anybody who fills even part of this wish list... any takers? No? Oh, well...
for me on the Bisons-how many models did they build-sounds like Bsion didn't get the oppertunities to build too many types-would love one of each.
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
Where are all your X-mas presents guys?
...We want pictures!
What an awesome couple of vacuums Jack, Santa left me an Electrolux Ultrasiencer and finally after three years following it, the Miele Medicair, YAY!
I've post a video of the Ultrasilencer on youtube, check it out:
...We want pictures!
What an awesome couple of vacuums Jack, Santa left me an Electrolux Ultrasiencer and finally after three years following it, the Miele Medicair, YAY!
I've post a video of the Ultrasilencer on youtube, check it out:
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
oops! I forgot the pictures...
Electrolux Ultrasilencer Z3340
Electrolux Ultrasilencer Z3340
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
and...
Miele Medicair Medicair 5000 Plus S5281.
Miele Medicair Medicair 5000 Plus S5281.
eurekaprince
Well-known member
Hey there Kevin! Love this Electrolux! The 110 Volt Ultrasilencer Green is highly rated by Consumer Reports here as a great non-carpet cleaner.
Just curious - where does one store the crevice tool? You never see anyone on YouTube showing you this.
EP Brian in Canada
Just curious - where does one store the crevice tool? You never see anyone on YouTube showing you this.
EP Brian in Canada
vacuumboy1993
Well-known member
- Joined
- Jun 3, 2008
- Messages
- 142
Hey Brian! Nice to hear you like it, the butterfly tool clips on the handgrip like most of the Luxes, but there's no place to store the crevice tool, so I store it on the box.
eurekaprince
Well-known member
Gracias Kevin!!!!! 
Well that's a bummer! You'd think for the money you pay, they could at least have made a tiny slot somewhere on the vac to slide in a crevice tool! I mean it does not require design ingenuity to find a place to dig a slot for that slim little uncomplicated tool.
Love the machine, but that must be a little annoying, don't you think?
EPB
Well that's a bummer! You'd think for the money you pay, they could at least have made a tiny slot somewhere on the vac to slide in a crevice tool! I mean it does not require design ingenuity to find a place to dig a slot for that slim little uncomplicated tool.
Love the machine, but that must be a little annoying, don't you think?
EPB
