Search results

Brush carriers If yours is the left, it will have the letter L on the top. I have one right side carrier, no left hand, sorry.

After checking that part #3890105000, I have found that they are listed as NLA, discontinued jan of 2011. I have one set left $8.95.

Carbon Brushes Those models have what is known as the drop in motor. Older machines had the carbon brushes accessible from the outside of the motor housing. The drop in motor carbon brushes are part #3890105000

adjust -o- rite I have an extra, It might be for an older model than yours, but the hole is the same. $7 shipped.

If it looks like this, the vac motor on this carcass is still good. I think this one had a bad circuit board.

Royal 145 Price was reduced

I'm selling a Royal model 145 that I have over 16 hours in its restoration. On ebay with a modest starting bid considering its age and the time taken to restore. If you have additional questions or need more photos email me...

Premiere Duplex I have an older Premiere Duplex, that most ads on ebay claim is from 1927. It is all original with a perfect bag. One problem, It has a bad armature. anyone have an old parts machine, the early GE is also very similar. The model is a 53, and the motor wattage is only 190W...

I was thinking that, It has the red and black bag, with the black and gold crown and royal logo in the red. The belt cover is black and red, with the red royal in the black and the black and gold crown in the red side.

What is the age of my Royal model 145? Serial # 145-3350.....Ben, are you out there?

Hoover bags If you are going to offer replacement bags, like you Kirby models, then bravo to you sir.

Vacuflo motor Your vacuflo used a 7.2" tangential discharge 2 stage motor like in picture one. He must be talking about a 3 stage 7.2" tangential discharge part #116103-00, picture 2. These motors are a lot more money than the 2 stage. Because of the extra height, this is why he mentioned...

Thermax As you may know, that is the recovery tank, The cleaning solution is filled in the round hole of the main body, Of course the machine should also have a vacuum hose, solution hose, and wand assembly. Capacity was not too much, maybe a couple gallons.

925 Ray, I may have some parts that would work. I know that I have the old style agitator and belt cover. I have a model 800 parts machine with a complete motor. It is rated at 340 watts. The 900 and 925 had a specific armature, bearing plate, fan, and belt pulley. I am not sure if the 800...

sc888 hood The same hood was used on the SC899 widetrack model for awhile. I have brand new chrome hoods and brand new headlight lense. I may also have some used hoods. Email me and I with your zip code and I can get you a price with shipping.

Eureka Williams I also have a Automatic pump vacuum. I will have to pull it out and add a picture tomorrow. They are very heavy, and because they are on a sled, hard to move around. Lots of cast iron parts. I have the handle and the wand, as well. Now to the offshoot. I was watching...

model 28 brush strips If they are curved and held in by a single screw, I do not have them. If they are held in by two screws on each brush and are the "canoe style" I only have one set left and they are nylon, not hair bristles. The canoe brushes cost way more, $15 shipped, and look like...

brush strips I have boxes of brush strips that I have tried to sort out. Early brush strips only had 4 digit part #'s then went to 5. The bigger problem with many early Hoover machines, is that the brush could have been changed out over the years. In the picture above, the top agitator is...

This hose appears to have the Hoover style suction regulator. Not sure what it fits. It has a friction fit tool end as well.

wide brush roll I saw this resurrected thread and went and looked at some odd brushes that I have. They are wider than the 1CR - 3CB brush rolls. They measure just over 16.75". The wood is not stamped Kirby, but they also do not have the CWP stamping either.