Search results

Kyle, You might try calling SEBO directly to find a dealer near you if you're having difficulties finding the part.

Ultralux upright No, that is not the Lux lite. It is the Ultralux version of their upright. It no longer is in production. I believe brush rolls and motors are the same as in the others. The after filter is a little different. It's been a while since I last saw/worked on one, memory a...

adjusting PN 2 brushroll height. Mercuryman To adjust the brush height to compensate for wear, the sleeve bearing ends can be rotated. It you look at the bearing end, as you rotate the bearing, you will see a flat piece on the frame, if it's still the oem bearing, it will probably say used...

Canadian Lux PN'S PN 2 I believe the PN 2's were used on our AP 100, 200, 280 series canisters. It had a few mods compared to the US. The Canadian version lid actually went over top of the power cord, you could not remove the power cord without first taking the lid off. The other difference...

Be forewarned!! If your belt has the habit of coming off, Lux has a modification to prevent this from happening. It entails placing an end cap on the rotating shaft. Your dealer should be able to supply it free of charge. They do have a service bulletin on this matter.

Lindhaus Power Nozzles All what I can say about the Lindhaus power nozzle is that they are phenomenal. It's amazing how much more dirt/debris a Lindhaus nozzle will remove right after using some of the "better known models" on the market. Also, the Lindaus nozzle is one of the few power nozzles...

Sure Thing or Germ Grabber bags??? Where the bags either of the above?? If so, I can probably find some specs on them for you. If you want a good filtering bag for your lux vacuum, go and buy some Perfect brand hepa bags, the filtration is phenomenal. Vernon

Yes, my grandmother had a Belltower polisher Yes, my grandmother had a Belltower polisher. Apparently my mother bought it for her for a christmas present. According to my mother, she bought it through a mail order catalog.

On the later Lux pn 4's, the front rubber bumper has eight slits in it. What is the reason for this?? (in order to move more dirt you have to move more air??, or were they put there in order to make it easier to push across the carpet (preventing the nozzle from sticking itself to the...

Suction = Inches of Water Lift Suction is usually measured in inches of water lift. Sometimes the rating will be given in inches/millimeters of mercury as well.

Perfect bags work fine/6500 problems I'll address two issues, problems with the 6500 and the use of Perfect bags. Were the 6500's problematic - no. Does this newer wand system have more problems than the older steel style - yes. One must remember that the more moving parts one has, the greater...

Dry Foam Cleaning Method If I'm not mistaken, this unit is known for the dry foam/low moisture cleaning method. A lot of these foam cleaning machines have a compressor like unit to make the detergent solution into a foam before it is applied to the carpet. Vernon

Too small of cord gauge causes overheating Most manufacturers have gone el-cheapo on the power cords. Instead of putting a 16 gauge power cord which will take upto 13 amps, they are using an 18 gauge which is only good for 10amps. If your machine is pulling 10-11 amps on an 18 gauge power cord...

Olympia 1 Sounds like an Olympia one if it has the full bag indicator like the SJ

Did the entire line get discontinued in the USA? Supposedly they have been discontinued in the US and Canada I believe as well.

Not to burst your bubble Alex, But, it would be interesting if you were to turn around and use your Kirby or another brand and see how much it pulls out after the dyson. I think you'll find it's and endless battle. This is so typical of carpeting. What type of carpeting were you cleaning?? My...

Tool Kit Available Yes, a tool kit was available, according to the schematics.

2 Stage motor, conical shaped fans Rick, It is a two stage motor with conical shaped fans (where the center sticks out). The guys at perfect did tell me the model number, but I would have to go looking for it as I do believe I have the spec sheet some place. If you're interested let me know...

Perfect Vacuum Motor by Lamb The Perfect Vacuum Motor is made by Lamb. It is their "Advantek" series motors. The difference being with this motor is that the carbon brushes come right after the fan unit, as compared to the usual set up where we have the fan, the field (coil), and then the...

I've owned one since May 2008 Joe, You are absolutely right, it is a clone of the Diamond Jubilee, marquis, ultralux a.k.a model 1521. The main difference is that it does not have a full bag indicator adjustment dial. It still retains the bag lock out switch though. In regards to performance...