Sentria

[lesinutah]

I have 2 sentrias. I took apart replaced fan replaced roller belt bag hose. When I put back together I didn't seal fan case or glue white plastic piece next to emptor. Both vacuum cleaners turn on and both have the motor on high speed. I was wondering if you had any ideas for me.

 

[ultralux88]

Check the area around the safety switch, make sure you don’t have anything caught there.

Personally I don’t care to remove the front fan housing on any G series Kirby, I always get to the fan by taking the motor out. I’m sure I must be a glutton for punishment or something to do that, or I just loathe dealing with the sealant on the fan case...

 

[lesinutah]

Hey

The belt lifter screw was misplaced and replacement screw was rubbing shaft. Just need right screw and washer and it's running fine now.