Royal prince bearings

[kirbyman65]

Hello!
I have 2 royal princes. Both of which have worn out bearings. I’d like to have at least one that still works well. But I don’t know how to install new bearings on these. I don’t know what to do. Any help is greatly appreciated. Thanks.
-Jack

 

[hoover300]

These had bushings until the last few years of manufacture. Are there oiler screws on it? Notably there would be a slanted one on the handle mount.

 

[kirbyman65]

These had bushings until the last few years of manufacture. Are there oiler screws on it? Notably there would be a slanted one on the handle mount.

Yes there are oil screws in it. I oiled both with some light gun oil.

 

[hoover300]

Before you replace anything, take it apart, clean it, and apply oil directly to the bushings. The belt shaft spindle unscrews from the fan, I don’t remember if clockwise or counter clockwise. Then fan should remove and you can access the motor screws to open it.

If it still doesn’t run well I miiiiight have have a spare motor.