Chaps,
What is the best way to bypass the PCB?
I have my dead Henry in bits - worked fine 2 days ago - today the light came on the hi-lo switch when Henry was powered up, but no motor. After sucking my teeth a few seconds and pressing the switch a couple of times, and cycling the power, now all lights are off. Switches test fine with meter, and there is power into the Henry from the plug.
So it looks like PCB. I'm happy to remove it, I only ever run it on high anyway.
I have a brown/blue/black/white into the red PCB. Do I join those, leave hi/lo switch alone, or remove from PCB and connect into hi/lo etc...
Any pointers appreciated.
Thanks
JF