look what I took in for searvice in my vac shop

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

And...

What did you use to clean off that painted base?
I'm always so afraid of doing much to those main bodies; I ruined a 115 and almost ruined a 61 when I got them wet. The paint was never quite the same.

~F
 
my store

is at 148 madison st. Oneida N.Y.13421
315-363-9083
25 min from the new york mills.


the bace did get wet, I scrubed it down. then some polish


Chris
 
Chris I would say that you did a fantastic job on that machine. I bet the lady was shocked when she came to get it. How often these days does one get that type of service??
 
Eric...

There is an older gentleman in the VCCC that does rebristling and from what I have heard, he does a very fine job and still takes in new jobs.

Does anyone in the VCCC know the name of this man? Does he in fact still do it?
 
Chris,

I have to second what Terry Lattz just said, what Wonderful Service! It seems customer service has become a thing of the past, yet you went out of your way to make this woman very happy.

Great Job!!! Thanks for making sure an older machine didn't get replaced with some new plastic thing.

Morgan
 
I hope she tells all her friends what you did, that is a super job and service you did for her. When Thurman's was in business in Ft. Pierce, you might have gotten a similar deal. The 90 something year old Mr. Mc Nee here, only sells and services new junk. He's a holdover from the past here too, but.......
 
Yes indeed, very fine job! That's truly "old school" service. I will say, there are still vac shops who attend to this level of detail, and one of them is Boulevard Vacuum here in Los Angeles - I've mentioned them many times in the past.

Boulevard Vac was started in 1949 and is still run by the original family; the founder's son Ron is now the owner. When they get in old machines like this, they lavish the same sort of care on them although it would be smarter, business wise, to convince the customer that her "dust-belching dirt-breeder" should be thrown out and replaced with a new plastic marvel (that will self-destruct in a month). They have loyal customers who have been coming in for decades for new purchases and service.

Quite a few times I've gotten calls from Ron, "Say, do you have a replacement switch for a Lux 30..." and so on. Always happy to help him when I can. One time a man had brought in a really nice Hoover 150 for service (don't know if he was the original owner or not). The bag needed replacing and he wanted an original replacement for it! Of course, he had to be told the disappointing news that such a bag had not been available for quite a few years, although Ron did call me "just in case," to see if I had one.

btw, great Electrolux boxes in the background! Do they contain the original machines? If I'm not mistaken, the one on the bottom is the 1949 XXX and the one on top is the turquoise G. I'd **LOVE** to have that G box!!

Again, a thousand accolades on your fine work!
 
A real treat

Chris,

.......to see a smashing cleaner given a new lease of life. The 28 appears to be the US version of our UK / 'Perivale' made 262. I was running a friends 262 about 2 weeks ago, which is a 'minter' and the power (325 watts) / weight ratio is perfect !!!

I am just old enough (50 next april) to remember 28 / 262 in older peoples houses / service shops but now all you sell are those horrid DYSONS and yes the 'WALMART' offerings.

Well done and regards, Walter, UK.
 
262 Wattage...

Do the UK models have larger motors? My 28 is rated at 300w, and when plugged into a wattmeter, indeed reads about 300w on startup. Just curious!
 
I also have another question. By the way, beautiful job with this!! I would love to bring my model 65 convertible to you and see what you could do with the warped motor head. I know, can't fix that on that model and everyone has that problem. Anyhow, my question is this. The owner claimed that she loved the dusting tools. Was the suction on that particular design, with attachments, better than on later "convertible" models? I have always looked at model 28 and the early 61- 64 models from afar and wondered if that side tool conversion approach was better than the convertible's
 
Wonderful. Looks fabulous with those carefully chosen replacement parts. The owner is one lucky lady!

When and if i reach the age of this machine, how wonderful it would be to be as easily and thoroughly rejuvenated!
 
Does anyone know where one can obtain the special tip that goes on the grease gun to grease the bearings? I would like to be able to grease the bearings on my Convertibles and that tool would make it so much easier. Thanks in advance.

Chad Cunningham
 
Excellent Work, Chris!!

And I'm sure the lady will be pleased with wht she sees when she comes to pick the machine up. The 28 has always been one of my favorite Hoovers, and you've done a great job restoring that one.
Jeff
 
Confirmation of what I told you on the phone....

Hi Chris :-)

Just wanted to get my comments in writing that I gave you over the phone when we spoke yesterday. What an awesome job you did on that 28!!! I have not seen service nor heard of any like it that compares with what you gave that lady and her beautiful 28. You went way above the "call of duty" for that 28 and its owner. Wow, I hope she leaves it in her will for you !! My Vac collection IS in my will to be sure someone gets them who wants and appreciates them. God forbid I should die before my time :-). Again Chris, it was great talking with you yesterday (sorry to have bothered you during business hours tho) and keep up the great service you provide to your customers and how you talk with them when they visit your store. I overheard the one conversation you had with a customer and you spoke with knowledge and politeness. A big thumbs up to you !!!

Jim
 
thanks

for all the kind words. the hoover grease nozzle tip is N.L.A. from hoover. but I would think you could take a grease gun and foce grease in the bearing if you dont have a nozzle tip.


thanks

Chris
 
electrolux box

is from a model G it has a date of 1965 stamped on the bottom. was found at a house sale in the box pile for customers to take ther junk home in.



Hoover 28 tool suction is ok for dusting, thats all. the models 60-64 do have a bit better suction, still not great. the convertibles have a bit better because of the two spead motor.


Chris
 
Chris...

You've certainly done a bang-up job on that 28. I'm just imagining the surprised look on the lady customer's face when she sees it and asks "Is that MY vacuum?" I'm sure you'll make or have already made her day! D
 
hose suction

i personally find better hose suction with my 1952 612 side conversion than my 1970 652c rear conversion 2speed. when you put a fresh bag on suction is quite good through the hose but it seems to weaken after the first hour, as if the paper bag pores clog with dust, however, the 612 with cloth bag only and single speed seems to provide stronger more long lasting suction

si
 
Hose Suction

Interesting. This confirms what I always thought. My mother and aunts that owned convertibles (model 65 pink through the early 60s light blue model - US) at that time, always looked down their noses at the tool suction, either didn't buy the tools or threw them away and insisted on having a canister for above floor cleaning. A shame that Hoover couldn't improve the performance at the time considering all the hype about tool conversion. I figured since this lady loved her dusting tools for so many years that they must be better with side conversion. And I'm sure even better now after this overhaul.
 
Chris....

How did you lube the new top bearing on the 28? Was it with the grease gun or how? I'm going to be working on my 28 and want to make sure that I do know what to do in advance. Thanks
 
top bearing

Do not grease the top sleeve bearing. they do not need lube. but you can use some Q-tips, with some motor oil to cleen the bearing if needed.


Chris
 

Latest posts

Back
Top