How to wire replacement power nozzle motor Epic 3500 SR

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

sduff7163

New member
Joined
Apr 14, 2021
Messages
1
Location
Southgate
Hello,
I'm stuck as to the proper way to wire a replacement power nozzle motor with no instructions or assistance from Aerus. No Youtube video exists except for an overview of the upright itself. It came with an additional wire to splice into the existing wiring. Can anyone help?
 
Basic

This isn't a how to its a general instructions.
You have usually 2 sets of wires. You get the wires coming in from power source. The other is from the motor. Yellow wires or positive are usually black, red or blue. Neutral is with yellow or any color with a white line.
Tbe power cord wires coming in either split sending a set t of wires to the motor and the other to the light.
There is more to it but black to black white to white etc.
 
Wiring it up

I have a quick question for you. Does your replacement motor have wires already attached or just clips attached to the motor. Here are 2 schematics that might help you. If you need more help please let me know.

gabowenjr-2021041420582108935_1.jpg

gabowenjr-2021041420582108935_2.jpg
 

Latest posts

Back
Top