bikerray
Well-known member
Found this Henry at Goodwill yesterday for $10, got it home and started cleaning it up. The foam in the exhaust and the foam over the top of the motor had just rotted. The Vacuum had a musty smell, cleaned everything with a dilute solution of bleach and soap and water. It only had the hose and wand handle with it. I just happen to have 3 Numatic paper bags that I picked up at Goodwill a couple of years ago, so that worked out well.
Getting into the motor it sounded like the bearings were going bad. Taking the motor apart it was just the lower bearing that needed to be replaced. The upper bearing was just fine.
Trying to figure out the age of this Henry, the tag has
Numatic Beaminster
Dorset England
NV200
115V ~ 680W
Input with Electric Nozzle 750W Total
The first 4 pictures are after I cleaned it the 5 is before I cleaned it.





Getting into the motor it sounded like the bearings were going bad. Taking the motor apart it was just the lower bearing that needed to be replaced. The upper bearing was just fine.
Trying to figure out the age of this Henry, the tag has
Numatic Beaminster
Dorset England
NV200
115V ~ 680W
Input with Electric Nozzle 750W Total
The first 4 pictures are after I cleaned it the 5 is before I cleaned it.




