help!

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

hamma214

New member
Joined
Nov 19, 2014
Messages
1
So my wife's lux guardian does not work all of a sudden. When the wand is hooked up and i turn it on, there is power to the brushes,but still the motor in the canister does not turn on. Therefore, resulting in no suction. Any suggestions? ? Model Number cc154E. Also any insight on the new designed guardian platinum, and where I could get one without paying retail? Thanks in advance guys!
P.s. The bag is not full and the door is shut.
Jerry
 
Jerry, it sounds to me to be either a faulty circuit board inside the canister, or a dead motor. However, since you say that the powerhead is still working, that tells me the two circuit boards must still be communicating with each other, so I would lean more likely towards a dead motor. Good luck with getting it repaired.

Rob
 
So many possibilities

Could be a bad motor. That's fairly simple. Or it could be in the hose. Loose or broken connection somewhere ( usually in the grip). I have seen the terminal blocks at the swivel go bad. Also seen the terminal just come unplugged. Then their is also the possibility of a bad switch board in the handle.
 
boards....boards....why do we need all these BOARDS?! 
smiley-surprised.gif



 


I'm sure even these things would be more reliable, my thread in the household department has proved that! 
smiley-tongue-out.gif


super-sweeper-2014112017451109602_1.jpg
 

Latest posts

Back
Top