help on hoover 6525C wiring

[adam-aussie-vac]

hey guys, my friend in the czech republic has a hoover 6525C and hes removed the suppressor, and hes having issues with his hoover senior after removing the suppressor as it was a paper suppressor, can you guys help him?

https://cdn.discordapp.com/attachments/990379004299206656/1003995078362152980/IMG_9391.jpg

https://cdn.discordapp.com/attachments/990379004299206656/1003995078773186661/IMG_9390.jpg

 

[compuvac]

Hoover Senior 6525C removing the supressor

Tell your friend to remove all the additional wires he made, they're causing a short circuit.

This is how it's done properly on a 6525C. All you need to do is to just remove the supressor capacitor and disconnect it from the circuit. That's it, as simple as that.

Use my pictures as a reference.

 

[compuvac]

Btw

It is absolutely normal and fine that on the other side where the other carbon brush contact is, that there's just 1 yellow wire going to it. That's how it's supposed to be.

The motor is wired in a series configuration where the stator and commutator are connected in series.