vacmom
Active member
The 2014 Convention hotel, the Crowne Plaza Cleveland Airport, will be set to start taking reservations tomorrow. I confirmed it today. Barb
Convention hotel
- Thread starter vacmom
- Start date
Help Support VacuumLand:
normvac
Well-known member
So Barb
WE have to send out $75.00 to who at VCCC. The treasure, Dave Olsen ?
WE have to send out $75.00 to who at VCCC. The treasure, Dave Olsen ?
normvac
Well-known member
So Barb
WE have to send out $75.00 to who at VCCC. The treasure, Dave Olsen ?
WE have to send out $75.00 to who at VCCC. The treasure, Dave Olsen ?
caligula
Well-known member
Hi Cap10323.
The convention will be held at the Crowne Plaza at the Cleveland Airport and all in-house functions like contests, meetings, and most likely the banquet, and awards, will take place in a huge meeting room. However, there have been times when the banquet was in a separate room. All outside events like factory tours and so on will be listed. Sometimes a member living in the area opens his or her home to show of the private collection. Sometimes there are trips to vacuum cleaner stores, or other points of interest. Basically we take over the hotel.
Check-in is an awesome sight to see. Dozens of vacuum cleaners in the lobby, some are on the floor, some are on bell carts and others are in the arms of their owners. After each machine is registered, and we get access to the meeting room, these vacuum cleaners are set up on tables. While the definition is not good and I plan to rescan these pictures, here's the award ceremony in 05. Yes the conventions are awesome.
To put it into a better term, it's a vacuum cleaner wonderland.
Alex Taber.
The convention will be held at the Crowne Plaza at the Cleveland Airport and all in-house functions like contests, meetings, and most likely the banquet, and awards, will take place in a huge meeting room. However, there have been times when the banquet was in a separate room. All outside events like factory tours and so on will be listed. Sometimes a member living in the area opens his or her home to show of the private collection. Sometimes there are trips to vacuum cleaner stores, or other points of interest. Basically we take over the hotel.
Check-in is an awesome sight to see. Dozens of vacuum cleaners in the lobby, some are on the floor, some are on bell carts and others are in the arms of their owners. After each machine is registered, and we get access to the meeting room, these vacuum cleaners are set up on tables. While the definition is not good and I plan to rescan these pictures, here's the award ceremony in 05. Yes the conventions are awesome.
To put it into a better term, it's a vacuum cleaner wonderland.
Alex Taber.
vacuumman206
Well-known member
- Joined
- Jun 17, 2012
- Messages
- 355
Alex
It is my understanding this is a weekend event, I plan to drive to Cleveland for a day. Do you know the schedule and if you do, could you tell me what day would be the best to come to the convention to be the most entertained; and see lots of vacs and meet lots of collectors?
Also, what does the $75 cover?
Thank you
Jordan
It is my understanding this is a weekend event, I plan to drive to Cleveland for a day. Do you know the schedule and if you do, could you tell me what day would be the best to come to the convention to be the most entertained; and see lots of vacs and meet lots of collectors?
Also, what does the $75 cover?
Thank you
Jordan
vacuumman206
Well-known member
- Joined
- Jun 17, 2012
- Messages
- 355
my bad
As I posted my double post, I recalled how I asked the same question before. I hate being the one to ask the same thing 2x when I should have looked first! Knowing my new work schedule now, Saturday seems to be the only viable option. Are the dates posted or is that to come?
As I posted my double post, I recalled how I asked the same question before. I hate being the one to ask the same thing 2x when I should have looked first! Knowing my new work schedule now, Saturday seems to be the only viable option. Are the dates posted or is that to come?
caligula
Well-known member
Hi vacuumman206.
It is! A full weekend of vacuum cleaner fun.
If I recall correctly, we gather at the hotel on Thursday, and get the meeting room late afternoon, where we gather and mingle. On Friday we have the contests, outside events, and so on. Saturday is the business meeting, election of officers, and the banquet that night. Sunday are the closing events, then we pack up the vacuum cleaners and head home.
Events change from year to year, but that is the basic line up. So watch for posts that will give you the complete agenda for this years convention, you'll be blown away!
Pictured here was the banquet for 05. Yes, that IS a vacuum cleaner on the table.
Alex Taber.
It is! A full weekend of vacuum cleaner fun.
If I recall correctly, we gather at the hotel on Thursday, and get the meeting room late afternoon, where we gather and mingle. On Friday we have the contests, outside events, and so on. Saturday is the business meeting, election of officers, and the banquet that night. Sunday are the closing events, then we pack up the vacuum cleaners and head home.
Events change from year to year, but that is the basic line up. So watch for posts that will give you the complete agenda for this years convention, you'll be blown away!
Pictured here was the banquet for 05. Yes, that IS a vacuum cleaner on the table.
Alex Taber.
caligula
Well-known member
Hi Cap10323.
Let me add one thing. When I stated that the banquet might be held in a separate room, I neglected to make it clear that it will still be in the Crowne Plaza. In most cases we have one room for everything, and on the night of the banquet, the chairs are removed and tables are set up. Here we are, vacuum cleaners on display tables around the border of the room, and usually some vacuum cleaner as a centerpiece for each table. If however, there are too many members, a larger banquet room is needed. After dinner there are the awards. Winners of the contests are announced, certain people honored and announcements made.
The first meeting was held in May of 1985, here's Mike Pupek at club headquarters in Naperville, Illinois at the second meeting in 86 telling about our club logo. If you happen to live in Cleveland, then plan to attend as many events as you can, join us for the banquet and share the fun, even if you go home each night. Trust me, once you get there you won't want it to end. You'll have the time of your life.
Alex Taber
Let me add one thing. When I stated that the banquet might be held in a separate room, I neglected to make it clear that it will still be in the Crowne Plaza. In most cases we have one room for everything, and on the night of the banquet, the chairs are removed and tables are set up. Here we are, vacuum cleaners on display tables around the border of the room, and usually some vacuum cleaner as a centerpiece for each table. If however, there are too many members, a larger banquet room is needed. After dinner there are the awards. Winners of the contests are announced, certain people honored and announcements made.
The first meeting was held in May of 1985, here's Mike Pupek at club headquarters in Naperville, Illinois at the second meeting in 86 telling about our club logo. If you happen to live in Cleveland, then plan to attend as many events as you can, join us for the banquet and share the fun, even if you go home each night. Trust me, once you get there you won't want it to end. You'll have the time of your life.
Alex Taber
Very Interesting!
I don't plan on coming.. I'm not nearly as interested in vacuums as I used to be.. (To The point of basically not caring) But Let me tell you... If This had happened when I was younger.. I would have loved to go!
Cap10323
I don't plan on coming.. I'm not nearly as interested in vacuums as I used to be.. (To The point of basically not caring) But Let me tell you... If This had happened when I was younger.. I would have loved to go!
Cap10323
caligula
Well-known member
Hi Cap10323.
I'm a bit confused. Why would you want to know the information of where the convention is going to be if you don't plan to attend?
But thank you for giving me the opportunity to tell others about the great events that await all of us. As a former Kirby employee, I can tell you this convention will be awesome!
And for those who ARE interested and DO plan to attend. I can assure you, Barb, and the others planning this event will post the agenda once it's ready to go, and most likely a registration form so we can all sign up.
Alex Taber.
I'm a bit confused. Why would you want to know the information of where the convention is going to be if you don't plan to attend?
But thank you for giving me the opportunity to tell others about the great events that await all of us. As a former Kirby employee, I can tell you this convention will be awesome!
And for those who ARE interested and DO plan to attend. I can assure you, Barb, and the others planning this event will post the agenda once it's ready to go, and most likely a registration form so we can all sign up.
Alex Taber.
vacmom
Active member
Convention registration
I have sent a copy of the schedule and registration form to our President to send out. If you want a form email me and I will send it to you. The schedule is still tentative. Sorry for the delay. My email is on the club roster or you can email me through this site. Thanks, Barb
I have sent a copy of the schedule and registration form to our President to send out. If you want a form email me and I will send it to you. The schedule is still tentative. Sorry for the delay. My email is on the club roster or you can email me through this site. Thanks, Barb
caligula
Well-known member
Thanks Barb.
Yes, please get me a form so I can book early. I'm hoping to hire a driver to get my non electric machines there for all to see. It's early, 4 months to go, but I really want to find somebody who's driving through northeast Pa. to get me to the convention and home. I'm willing to cover all expenses involved with travel, tolls, gas, meals and so on.
I'm looking forward to seeing you and Scott, and returning to the company I once worked for.
Alex Taber.
Yes, please get me a form so I can book early. I'm hoping to hire a driver to get my non electric machines there for all to see. It's early, 4 months to go, but I really want to find somebody who's driving through northeast Pa. to get me to the convention and home. I'm willing to cover all expenses involved with travel, tolls, gas, meals and so on.
I'm looking forward to seeing you and Scott, and returning to the company I once worked for.
Alex Taber.
caligula
Well-known member
Hi Barb.
I got my registration form today, I've already filled it out, and will mail it to Dave Olsen along with a money order tomorrow. Thanks for getting it to me. As for the hotel, tabled that so the front desk would register a few people, and get the process going. I'll book with them sometime next week.
See you in June,
Alex Taber.
I got my registration form today, I've already filled it out, and will mail it to Dave Olsen along with a money order tomorrow. Thanks for getting it to me. As for the hotel, tabled that so the front desk would register a few people, and get the process going. I'll book with them sometime next week.
See you in June,
Alex Taber.
super-sweeper
Well-known member
Will anyone be traveling by,
HOOVER Airlines?
(Below being a very poorly pasted image of the Infamous HOOVER Convertible model 68 from "Who's minding the store" onto a Hot air balloon).
Tickets are on sale at your nearest authorized HOOVER center!
HOOVER Airlines?
(Below being a very poorly pasted image of the Infamous HOOVER Convertible model 68 from "Who's minding the store" onto a Hot air balloon).
Tickets are on sale at your nearest authorized HOOVER center!
Similar threads
Latest posts
-
-
-
-
-
-
-
-
Anyone else think the pre "ball" Dysons had better Bin/Cyclone designs?
- Latest: rlsellman21