Brush roll and belt questions

[stephanb9]

So ive been doing some substantial digging into past posts and wanted to know if these parts will work for my 993 royal and 880 royal

993 (6 amp)
2675227000 ball bearing brush roll with stiffeners
1044260001 belt

880 (3 amp no stiffeners)
2675221000 brush roll without stiffeners
1044260001 belt

 

[kirbyclassiciii]

StephanB9

Stephan,

Yes for both.

~Ben

 

[stephanb9]

Thanks Ben I figured but just wanted to double check. Also do you have any suggestions on good places to source these parts?

 

[kirbyclassiciii]

StephanB9

Stephan,

To actually find these is going to be a bit harder. The belt is easy to find but not the square-ended brush rolls themselves, and the prices they go for these days aren't really easy to bite. eBay is one place to seek these out, but is not the only source. Good luck!

I found the 2-675221-000 brush roll for your 880 on eBay. It's priced at $62.69 but shipping is free. Seller has two.

~Ben

https://www.ebay.com/itm/193380637287

 

[stephanb9]

Thanks for the help I found both brushes for about 45 bucks a piece and the belts for 3 bucks a piece and have them on order

 

[kirbyclassiciii]

stephanb9

Stephan,

Awesome!

~Ben

 

[ctvacman]

Stephan

Where did you find the brush roll with stiffeners? I just got one from eBay that showed it in the picture but it didn’t have them when I got it. I hate lazy eBay sellers that don’t update the pictures.

 

[stephanb9]

http://www.svcvacuum.com/royal/r-2088221000.htm -Brush roll with stiffeners
https://cjmillervac.com/products/royal-1044260001-metal-upright-vacuum-belt -Belts
https://www.amazon.com/Brushroll-End-Ball-Bearing-Commercial/dp/B00Y34ZYSW -Brush roll without stiffeners

 

[stephanb9]

Well bad news both of my brush roll orders were cancelled so the search continues however it sounds like the vacuum shop in town has a line on them so here's hoping fingers crossed.

 

[kirbyclassiciii]

stephanb9

Stephan,

Sorry to see about the canceled orders. I am sure there are other places to try that do have what you're after. Never give up!

~Ben

 

[stephanb9]

Hey Ben here is the data tag for the 880 am I correct in my thinking that the production date is January 1975?

 

[kirbyclassiciii]

StephanB9

Stephan,

Yes, your 880 was made in January 1975.

~Ben