Search results

It's an e2 You can tell by the new style handle grip and stainless steel wand.

yes Your wiring is correct other than the motor in upside down in the houseing. Disconnect the wires and flip it the correct way.

indicator lights? Do you have the system indicator lights on your inlet valves? I have seen a similar issue with Airvac systems where for some reason the indicator lights don't communicate properly and cause the vacuum to shut down. What I have done in the past is just disconnect the indicator...

The Oreck roller was defective Oreck had a bad batch of rollers a number of years ago. The roller shown is one of the defective ones. Those brushes are not worn but broken off rather. They were recalled at one time by Oreck Manufacturing. I don't think they will honor the recall anymore it may...

I like them The rise of the hepa/ cloth bags is due in part to the increased use of the so called "high performance" motors. Many manufacturers are using these newer high revving motors in the new vacuum and are also offering Hepa bags. Often times new machines are coming standard with hepa...

a few bucks sounds good to me. use my personal email in my profile that is the best way to contact me.

i have some. I have quite a few of those.

I have tons and tons of Orecks. I am fairly sure I have a 3600 40th anniversary. And I believe I also have a few different classic uprights with the stick handle. Shoot me a personal email and we can talk.

The rattle is the cord guards as already stated This is a common annoyance with some batches of baseplates. The Oreck store can replace it under warranty. There is no real threat with the sound. I have personally had customers who fussed about it but it never bothers me. If all else fails take...

I have orecks. I have about a half a dozen older orecks such as the early 9000 series. I also have misc other models new and old. Let me know what more specifically you want. Thanks Seth

no on the smart vac I would stay away from the Eureka Smart Vac they have a lot of issues with the belt and brushroll. The belt design is very poor it wears very easily and also wears at the roller brush. A lot of my customers have had to replace both belt and roller brush and average of once a...

YES! I use a bearing puller that was make for the old Kirby machines to get the back bearing off. It works great! Once off you just tap the new one on. I also have a bearing puller set i bought off eBay a while back which has been very handle for a number of different machines.

I hate it I have been telling customers for years that those powders will ruin any vacuum. I have seen fairly new machines come in with burnt up motors from carpet powders that went right through the filters. Due to that I do not honor any warranty on a refurbished machine if carpet powders are...

i have hoover attachments I have some beige lightly used/ NOS attachments that might work for your Celebrity. The only part I am iffy on is the floor brush, not recalling if I have one tucked away or not. Shoot me an email if your still looking. I also have a few old stock parts for Eureka...

Electrolux CB I would love to buy that unit but i am sure it has a special place in the museum.

Electrified power tank hose just listed Finally checked the power tank hose to find it fully functional and listed on ebay. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300906748091

Check your spring Often its not a matter of lubrication it is the spring going off alignment. In most cases I have been able to take the winder all the way apart and recoil the spring back into alignment to correct the problem.

Go basic In my repair experience the basic hoover steam vac ($120 wal-mart model) holds up better than the Dual-V Models. I honestly don't know why that is but I find the Turbine assembly goes out more frequently one the Dual-v over the standard spin scrub. I will also add the standard spin...

To get the scuffs off use magic erasers with rubbing alcohol. The paint marks will practically jump off. And its cheap! Then I use basic windex to get the residue off from the magic eraser. Seth

Very good I will message you. Seth