human
Well-known member
I think I've posted from time to time that I have an interest in electrical test equipment. I recently acquired a Simpson 260 Series 6XL volt-ohm-miliammeter (aka multimeter or multitester) and I discovered—not surprisingly—that the batteries, which had been in there since sometime in the '90s, had leaked. In trying to remove the D cell, I one of the battery contacts broke apart. That's when I discovered an extremely thoughtful—and as far as I can tell, undocumented—design feature. There was a metal tension clip to help hold the 9volt battery in place that was actually a spare battery contact! After cleaning out all the crud, I soldered the spare battery contact into place and the meter was right as rain. I've seen plenty of meters with a spare fuse but never a spare battery contact. In examining photos of Series 6 and newer meters on the simpson260.com Website, I discovered it's a standard feature on all 260 meters equipped with a 9-volt battery. Now, that's thinking ahead. It's something that probably cost the manufacturer two cents per meter, if that much and gives end users an opportunity to repair an almost inevitable failure. I wish all manufacturers thought that way about their products.