Roboclean 114F Water Separator needed

[jsfoster75]

Looking to buy a new water separator (probably would buy 2) for a Roboclean 114F/114F+. Photos are of my Roboclean model as well as the part needed.

I've tried every resource I can find, and my option seems to be ordering it from another country and paying $50 in shipping... I really prefer not to do that and am hoping someone here either has one for sale or knows where I can purchase one.

Please click on my profile and email me, that will reach me must faster.

Thanks in advance.

 

[dysonman1]

That's the same exact separator Sirena uses. Also Pro Aqua. It would be easy to find a separator. Sirena is sold in vac shops, most vac shops can order the part.

 

[jsfoster75]

@dysonman1 I ordered the Serina one and it didn't fit... The "spindle" hole was way too small. This one: https://www.ezvacuum.com/sirena-s10na-water-separator-with-nut-s10nasep.html

I'll check on the Pro Aqua, thanks for the tip.



https://www.ezvacuum.com/sirena-s10na-water-separator-with-nut-s10nasep.html

 

[electroluxxxx]

Question is... considering the home was too small was the separator the same size?

 

[jsfoster75]

It was nearly identical, I considered trying to drill it out, but I don't think the wall was thick enough to allow for that...

 

[electroluxxxx]

Drilling it out...

was going to be my suggestion.

 

[gabowenjr]

Separator

I had a bunch of parts for the robocleans as I used to buy the bojacks from a few dealers here in Florida and repair them when they broke for them since neither distributor knew how. Let me check my parts I may still have one lying around.

 

[jsfoster75]

That would be awesome. I went to a machine shop and they are trying to replicate one for me, not sure what the outcome of that will be...

 

[jsfoster75]

Well, I'm now the proud owner of 2 Water Separators that I had 3D printed at a local machine shop... Total cost for 2 - $60. Would have cost nearly $100 for 1 to be shipped from another country and run the risk of it never arriving...

I'll report back after testing these to make sure they function like the original.