Rainbow electric hose issue

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

vacsofprosper

Well-known member
Joined
Apr 11, 2022
Messages
147
Location
TX
Recently I got a used rainbow e2 electric hose from ebay and it's in good condition. I brought it so I can save it for a rainbow e2 blue. Only problem I found out is that the end of the hose, there's a torn spot. Is there a way to fix it up? Since this one has double insulated wires. Thank you.👍

vacsofprosper-2023070822511905431_1.jpg

vacsofprosper-2023070822511905431_2.jpg
 
You

Can twist off the end of the hose in a counterclowise pattern. You cut the hose shorter and symmetrical and reinstall the end of the hose
 
But if you cut the wires in the hose, you have to somehow reattach them to the hose ends so that you can provide electricity to the power nozzle. It’s not a simple process to reconnect these wires.
 
I was thinking. Can a good type of super glue that has a good air tight seal and adhesive will work instead of me trying to take it apart or cut a piece of the hose off?
 
Lesinutah, just saw your post. A couple of days ago I got some miracle wrap and some super glue to close up the tear and then use some silicone sealant for the outside and inside.
 

Latest posts

Back
Top