Oreck Dual Stack Nozzle/Base

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

broomvac

Well-known member
Joined
Sep 25, 2011
Messages
842
Location
N/A
Hey everyone,

I am looking to buy a new or used nozzle/base/chassis from an Oreck Dual Stack DS1600HY or DS1600RY (16 in model). Unfortunately, mine is cracked. Let me know if you have this and I would be happy to make a deal with you.

Thanks,
broomvac
 
@huskyvacs

Thank you for the advice. I considered plastic welding, but since the crack was clean and I’ve had good luck with super glue mending ABS, I went that route. First, I drilled the end of the crack to eliminate any stress at its tip, preventing it from potentially spreading. Next,I filled it with Super Glue Ultra Liquid, and finally finished it off with a reinforcing brace at the other end of the crack. I bet this is stronger than it was before the crack.

That said, since I am a perfectionist, I am still interested in finding a crack-free replacement. If anyone has one of these, please still let me know! I would be interested in buying it.

broomvac-2024122808490201942_1.jpg

broomvac-2024122808490201942_2.jpg
 

Latest posts

Back
Top