New cord Compact Electra C9

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

compactc9guy

Well-known member
Joined
Aug 18, 2012
Messages
1,254
Location
Bathurst NB
Sooo  i notice my cord getting a split in the outside cassing.Ooooh noooo!Open the machine my lord i got lucly all is ok no damage no smoke fiouuu. So  new cord  re wire and voiiiilaaa!!😀😀😀

compactc9guy-2018120619345207275_1.jpg

compactc9guy-2018120619345207275_2.jpg

compactc9guy-2018120619345207275_3.jpg
 
yepppp i got lucky found google info to

Yep open the vacuum,remove 3 ,
screws remove bumper ,
locate 3 grommets
undo the 3
and change cord
power nozzle receptacle white , to motor black , to cord white .
cord black to switch black .
power nozzle receptacle white to remaining wire to motor black,white to switch
anddd voila put 3 grommets tightly (make sure wires are all properly inserted no short ect) screw 3 grommet tight snug and put wires away from moving part aka Motor ect
put motor cord bumper and vacuum back together pray lol turn on and voila .

Also no weird noise no problem switch it on suction air flow is good did not get any hotter than usual and no smell maybe just a hint of dust smell but i think thats just due to me working on it and maybe dust flew in the air and power nozzle connected to the wand and hose plug in no problem all seem to work 100% again.
 
weehooo! she works no smell no noise just pure smooth running vacuum aah im so glad she is my daily driver just tried it again down stairs no problemo
 

Latest posts

Back
Top