My 1st Rug Renovator!

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

gj3476

gj3476

Well-known member
Joined
Oct 11, 2017
Messages
803
Location
Prosper,TX
Hi everybody so I brought a nice conditioned Kirby Rug Renovator Kit on eBay and I brought this particular one for my Classic Omega (hopefully get it working again), and my Classic III. This one has 3 hooks on the back and it looks the same as the Classic Omega and III so I would love to give this attachment a try and I also used the carpet fluffer/floor polisher on the Classic III and it was amazing! I do have a lil problem, I’m trying to place in a new belt for the shampoo nozzle and I’m having bit of a trouble removing the brushroll off. The screw is supposed to come off along with the rubber piece so if anyone knows about removing the brushroll off the Rug Renovator I would love to use the shampoo part for the first time. Thank u!

gj3476-2018071718393703358_1.jpg

gj3476-2018071718393703358_2.jpg

gj3476-2018071718393703358_3.jpg
 
This set is for a...

Heritage II, Legend, or Legend II. Will not fit the Omega or Classic III.

Go to Kirby's webpage and look up the owners manuals on how to change the belt.
 
you may have to

put screw drivers in both ends of the brushroll....and one of the screws will release faster than than the other. Remove one, pull away the brushroll from the shampooer, and put the new belt on. Reverse the process to put together, you may have to use a toothpic or pick to align the shafter that runs thru the brushroll ( looking at it from the end piece) so that you can screw the screw/rubber guard back in.
 
"...Will not fit the Omega or Classic III..."

It may fit, but the question would be, would it depress the Safety Speed Selector switch on these models. The Switch on the Heritage and Legend models are not on the attachment bar, but the fan case.

The picture you show looks like it may have a depression to press the switch on the attachment bar, just a matter of trying it, I would guess.
 
1st off...My name is Jae....

2nd off. The safety switch on a Classic omega and on a Heritage II are in two totally different configurations. So thus, this Rug renovator set is not suitable for a Classic Omega.
 
The head you need looks like the blue one. It is from a Tradition model that has the same attaching lug configuration as seen on that one.

The Black head is from my Heritage II. If you look closely at both pictures you will see the Black head lacks the 3rd attaching lug close to the center of the fan opening. That lug depresses the safety switch on the Omega, Classic III and Tradition Models.

kirby519-2018071821384505702_1.jpg

kirby519-2018071821384505702_2.jpg
 
color matching

I've developed a color obsession ....I want each of my Kirby's....to have the matching attachments. Its serious overkill....but I rotate the vacuums (for use) and...just like it when everything matches! haha. I"m NOT like that in general life....so how do I explain that??? Classic III with all attachments....1-cr with all except Shampooer, Dual Sanitronic with 90% matching....see, its bugging me that I'm missing the crevice tool....I would rarely use it, but I want to complete the set!! haha. arggghhhhh
 
Gj3476

Gabriel,


 


Thank you!


 


As to finding black tools, that shouldn't be much of a problem these days, considering black is pretty much the only color Kirby offers for attachments for all its older (pre-Generation 3) machines. Among them that you want for your Classic Omega is the hose (part no. 223666) whose universal suction coupler will trigger the speed switches on all Kirbys ranging from the 516 up to the 3CB Tradition, and then buy the Heritage II tools to compliment that.


 


There were numerous other Kirbys in black: in addition to the Heritage II (and the 1987-89 Legend refreshing), the very first Kirbys were also black, including the inaugural product to carry the Kirby name, the 1934 model C, and its successors the 2C (1939-40), 3C (1940-41), 4C (1941-42) and 505 (1945-48), and the Gsix and Avalir among the present-day Kirbys.


 


And here are some pictures of my 1987 Heritage II with the shake-out bag (seen with both the standard 16" nozzle and the less-common 13" nozzle). It was not original to this serial number, because when I first got it, it had the long 6" rear axle specific to the common Mini Emtor setup. And while I wanted an actual black hammertoned Sani Emtor for the shake out bag so as to match with the rest of the trim, they are deemed extremely rare these days so I settled for an aluminum one, which came from a Classic 1CR.


 


~Ben

[this post was last edited: 7/21/2018-02:07]

kirbyclassiciii-2018072101185008391_1.jpg

kirbyclassiciii-2018072101185008391_2.jpg

kirbyclassiciii-2018072101185008391_3.jpg

kirbyclassiciii-2018072101185008391_4.jpg

kirbyclassiciii-2018072101185008391_5.jpg
 
Hey

Ben I don't like the flannel type bag the classic 3 came with. I really like the legend bag. I may get me a classic 3 and do the bag setup.
The classic and classic omegas' with the black heritage nozzle looks awesome. It's like a mountain man wearing a tuxedo. I got a rug rennovator for a c3. I have a tradition rug rennovator. The classic I have I have ever attachment made for it. They are all in mint condition. The previous owner bought it new.
I'm waiting on fixing the coil.
I used my avalir shampoo system today. I used my avalir. I use it with my seit.
Les
 

Similar threads

human
Discovery Plus Gets a New Lease on Life
Replies
7
Views
139
panasonicvac
panasonicvac
rainbowd4c
This is how my love of Rainbow started.
Replies
0
Views
15
rainbowd4c
rainbowd4c
hygiene903
Pictures!
Replies
15
Views
16
rugsucker
R
ihavetotryagain
My experience with a Dirt Devil Quick & Light Carpet Cleaner
Replies
4
Views
52
kirbyman65
kirbyman65
justjunque
Oreck model number (letter) decoding?
Replies
2
Views
20
justjunque
justjunque

Latest posts

Back
Top