ilovehoovers
Well-known member
I want to replace it with a normal hose but don't know how to get the connector at the machine end off. Any help appreciated!
How do you replace a Hoover Constellation hose?
- Thread starter ilovehoovers
- Start date
Help Support VacuumLand:
eurekafansquid
Well-known member
Maybe try using the back side of a hammer aaaaaaaaaaaaa i dont knoww
ilovehoovers
Well-known member
Thanks! I'll try that I guess...
kirbyklekter
Well-known member
If you know
of a place,vacuum repair or other that will make you a new one using the couplers from your old hose, that is one way. I took my non-electrified hose to a model F Electrolux to a guy who specialized in making custom hoses for just about everything. Have you checked the archives here or on you tube for hose repair?
of a place,vacuum repair or other that will make you a new one using the couplers from your old hose, that is one way. I took my non-electrified hose to a model F Electrolux to a guy who specialized in making custom hoses for just about everything. Have you checked the archives here or on you tube for hose repair?
ilovehoovers
Well-known member
Could you link me to a YouTube video? I can't find one...
are you wanting to
remove the old hose from the connector or remove the connector from the machine?.If its hose from the connector just drop it in some very hot water for a while and it will just pull off along with the shroud thats on the end
remove the old hose from the connector or remove the connector from the machine?.If its hose from the connector just drop it in some very hot water for a while and it will just pull off along with the shroud thats on the end
bikerray
Well-known member
The plastic cover at the end of the hose will come off when you get the hose off. The hose is more or less screwed on the connector with some glue. If you twist the hose it should come loose or just cut the hose and take pliers and pull on the wire reinforcement in the hose.
