hoover 612 homemade bag

[anthony]

hi guys i am relativley new here and have never posted before but i enjoy reading through the latest posts I have always been unhappy with the grey replacement bag on my hoover 612 so i decided to try and make one thought you might like to see the results the bag is made from heavy duty calico

 

[anthony]

homemade bag

another pic

 

[anthony]

homemade bag

another

 

[anthony]

homemade bag

i know its not perfect but its got to be better than the grey one im not sure what an origional should look like anyone got a picture of one i will try to make my second atempt more authentic the colour is actualy dark brown but the flash on the camera makes it look lighter heres another

 

[gsheen]

That's fantastic, I am busy restoring  a 612 myself and am not sure what to do  about the bag, really looks great 


Gareth

 

[anthony]

homemade bag

another

 

[vacbear58]

612

Anthony

your 612 looks to be in lovely order, have you resprayed the hood and handle? The correct bag should be mid brwon with gold pin striping. Your "Custom" bag is a very good effort though

Al

 

[anthony]

hoover 612

hi Al the 612 was my grandmas iv had it about 10 years it has been resprayed and the hood has also been sprayed because there is a crack in it which is a shame because i quite like the mottled bakelite . if i can get a look at an origional my next effort will be much better the folds in the cloth are stiched in so when the bag deflates it looks straight and not like a deflated baloon cheers Anthony

 

[kirbymodel2c]

Hi

Hi Anthony, Your Hoover 612 looks great)You have done a good job on the bag)
What other vacuums do you have?

James)

 

[twocvbloke]

Another solution for a custom replacement bag is to use a black Kirby flap-top shakeout bag (used on the 500 series), you just need to replace the spring in the collar with the clamp ring from the Hoover bag, and the bag slide at the top should fit perfectly well and you have the benefit of having the flap to cover the top so the slide doesn't scratch anything it brushes up against...

Nice custom bag though, looks a lot better than my Hoover Junior "Trouser leg" bag that I made a while ago, out of sheer boredom really...

 

[twocvbloke]

Got a hold of a pic, with permission, of a Hoover 28 with the Kirby 500 flap-top bag fitted, looks like it belongs there if you ask me...

 

[pr-21]

Very Nice Jobs

I wish my ablilty to restore vacuums, went further than sanitizing, detailing and putting new bags, brush rolls, belts and bulbs. You all did amazing work with making the bags to fit your vintage vacs.


 


Thanks for sharing,


 


Bud Mattingly


PR-21

 

[twocvbloke]

It's not that hard to modify bags (or old trouser legs in my case!!) and whatnot to fit, but actually making a bag from scratch is a pretty good feat in itself, even I can't do that... :S

 

[appliancelou]

fantastic !

bravo for you anthony great job!!!!

 

[luxg]

Great job Anthony!!!  I love your lettering!


Terry

 

[watsonw]

Hello Anthony,

Your really have the 'knack'; that stenciling card/tape looked totally professional!

I would love to be able myself or find someone to make me a bag for my 541 when I can find the time for the full restoration.

Again, you've done a first class job on what must be one of the most difficult vintage vac projects.


Regards, Walter, Shropshire, WEST MIDS.

 

[rob_89]

Bag stencil

Hi Anthony,

Your homemade bag looks really good! Nice restoration job. Do you mind me asking what you use for doing the stencil- it it a fabric paint applied over the template? I am hoping to do similar with a Junior bag as the replacement one it came with is well past its best.

Rob

 

[anthony]

homemade bag

the bag wasnt to dificult to make i used the old one to make a template because the old bag had been washed it had shrunk so i made the new one an inch bigger the trick is to get the creases in the right place then run the sewing machine along them so they stay in place then i fitted the strips in the top they are made from an old tuperware box then i dyed the bag the lettering is nothing special i used extra wide masking tape the letters were made with one of those plastic strips with the alphabet punched out and the paint is the same laquer i used to spray the machines body my next project is to try and make agrey bag for my 652a .What you cant see is the fabric six inch long funnel stiched to the inlet this colapses in on itself when the machine is swiched off stopping the dirt falling back into the fan chamber i love this hoover it runs rings round a modern vac my other vacuums are a senior 652a that my mums had from new a hoover 700 two kirbys a heritage and a g5 an old 50s goblin cylider that has a much later electrolux motor in it vastly improving the suction i use it regularly to clean the car but getting back to the 612 as i said earlier it was my grandmas and as a small boy i remember being terified of it probably because i had seen imposible things being sucked up similar machine on tom and gerry ok guys thanks for your interest Anthony

 

[crevicetool]

Very good job on the bag! I know they ain't easy.