vactec2
Member
I have an Electrolux CB made around the 1205 era, it needs new motor brushes. Can i get some 1205 brushes and use those?
Electrolux CB
- Thread starter vactec2
- Start date
Help Support VacuumLand:
bnsd60m9200
Well-known member
its the same motor. the only difference in the CB is the power nozzle ground wire and it's capacity
vactec2
Member
Bnsd60m9200
Okay, Thank You!
Okay, Thank You!
vacman1961
Well-known member
Does it have the 1205 style motor or the Super J motor? You can tell by the power nozzle outlet on the outside of the vacuum If the female receptacle is black and has a standard female receptacle it is the smaller 1205 motor, if it is grey and has 3 female pins in the receptacle it has the larger Super J motor. I have both sets of you need them.
vactec2
Member
VacMan 1961
it is kind of a two-tone blue/ chrome drum. It has what looks like a standard wall outlet as a powernozzle port (just in black)
Like the image below. image credit to whoever on vacuumland
it is kind of a two-tone blue/ chrome drum. It has what looks like a standard wall outlet as a powernozzle port (just in black)
Like the image below. image credit to whoever on vacuumland
vacman1961
Well-known member
Ok, that is the earlier style with the 1205 motor, actually it is a Model L motor in there. Have you checked the carbon brushes, are they definitely worn or did the inner part of the brush holders slide into the commutator on the armature causing the brushes not to hit the commutator? Very easy machine to work on, if you need brushes let me know, I'm sure i have some here.
vactec2
Member
VacMan1961
I smell kinda a burning smell when its on, and i checked the brushes, they spark like a b word. i looked at them and they are really short.
I smell kinda a burning smell when its on, and i checked the brushes, they spark like a b word. i looked at them and they are really short.
vacman1961
Well-known member
First thing you need to check is the clearance between the brass part of the brush holder if it is flush with the plastic part of the brush holder where the carbon brush is inserted into the holder, I will post pictures on what i am talking about tomorrow. Then get a new set of brushes and then stone the commutator with some seeing chalk. If you need brushes let me know.
