COMPACT C9 HELP!!!!!!!!

[thevacomaticiec]

help!!!

my lovely compact c9 is arcking in the blower port blue alot what is wrong with her ???? help help help she is arking blue i can see it in blower port almost no suction help !?!? is it the carbon brush ??? Or am i better off replacing the whole motor ???

 

[thevacomaticiec]

will this fit ? if soem one knows what motor will fit my COMPACT ELECTRA C9 let me know here asdap she is my jewel of my colleciton ty my grand ma had one so its special to me ty .

https://www.ebay.com/itm/392695410036?epid=16019516594&hash=item5b6e786d74:g:GScAAOSwIVdeDi0l

 

[vacman1961]

Hi Antoine, That motor that you selected is not the motor that is in your C-9, starting with the C-8 they used a hi performance motor. Your motor is repairable, have you ever taken a Compact apart? If you send me the motor I will repair it for you no charge. It might cost to much to ship the whole vacuum to me, you can if you want.

 

[vacman1961]

This is the part number of the replacement motor. #115923

 

[thevacomaticiec]

Oooh interesting tell me more ,

And yes i have taken the compat appart before to repleace the cord what motor would fit the c9 and how much would you charge to ship ill compare the 2 .

 

[thevacomaticiec]

this would fit?

https://www.ebay.com/itm/194040572315?epid=1522024401&hash=item2d2db8299b:g:Q7QAAOSw4ppgviXx

 

[dysonman1]

Yes. That link you shared IS the correct replacement motor for your machine. When you replace the old motor with the new one, the machine will be "new" as the motor is the heart of a vacuum cleaner. It's a good price for the replacement motor on eBay. Very good price.

 

[thevacomaticiec]

Good i will put it in shes mydailydriver and my grand ma had one very special to me ty.

 

[thevacomaticiec]

I pull the triger and order it yes she will be new since 2011 the only part i didnt replace was the motor and she get used alot ty info.May i have wiring diagram ty.

 

[lesinutah]

Carbon brushes

Iirc correctly acting is usually the carbon brushes wore out scraping on metal.

 

[thevacomaticiec]

yepppp


i open her up and one contact is worn down to nothing almost and the other one not far behind she had a good life...But She will be born again new motor order today .

 

[thevacomaticiec]

motor is on its way cant wait tune her up good .

 

[thevacomaticiec]

any one got wiring diagram again motor is on its way need wiring intruction againty.

 

[thevacomaticiec]

motor has arrive yayy time to install .

 

[thevacomaticiec]

I need help again the motor sounded strange then the fire alarm went off and i
smell like a burning smell i shut off imediatly open her up motor is hot all filter in palce dotn tel me i got a dud nooooo

was wired properly if its a dud i am asking for full REFUND!!!!

 

[thevacomaticiec]

Here's a simple way to remember one speed canister vacuum wiring.

There are two leads from motor. Two from cord. Two from switch. Two from power nozzle receptacle.

Connect in this order:
One cord to One motor and One receptacle

One cord to one switch

One motor to one receptacle to one switch

In the end, there should be three wire nuts holding the eight leads in the above connections.







was wried acording to this NEED ADVICE NOW HELP i spent 100$ here

 

[thevacomaticiec]

Can some one please message me ASAP i am literally about to cry here thsi is my lovely prize C9 put new motor in h ad plastic melt smell and fire alarm went off son of blank ..... i message the selelr for refund can some one please help me ty .[this post was last edited: 7/20/2021-12:25]

 

[thevacomaticiec]

Well i cannot belive it just cant there is a crack in the housing near the top bearing woow thanks shipping for damage my motor really ty ty ya glad ebay accept return ....im boilling.

 

[lesinutah]

Dude

Swap the carbon brushes for old motor. There's no way there's 5000 hours on it.
I'd say try it the motors last forever.