So this is the second machine I got from the same lady, this one a upright with brand new attachments.
The base was severely yellowed and the fan mad a noise when it ran, the bearings were also shot.
The cord too was a little short for my liking
The motor was stripped, new 608 bearings fitted.
You cant get the belts for these machines anymore so I used the large belt from a dyson dc14 clutch. Worked a treat
The attachments are new, the extention tubes are very long, longer than any I have found before, much longer than any on modern day vacuums that still use two separate tubes.
The hose is also very long for a upright vacuum, especially a budget one like this one
Their are two base plate covers that clip over the base plate of the machine, one is obviously for hard floor vacuuming as it has a felt strip( that fell off and I forgot to add it back for the pic ) it also fearures the lever to activate the higher wattage button like the converter plate.
The other plate has a odd extra side piece on one side and little pins and a very narrow opening but does not have the lever to operate the higher suction. The instructions have no info on the tool usage
Interesting little vacuum and attachments-like the idea of the pigtail cord-you can then get a cord as long or short as you need.Does this use disposable bags? or is it a dump bag?