jord123
Well-known member
please help me i need the service my filter queen but cant get it apart to clean the motor i have removed the 3 screws from the top
calling all filter queen experts
- Thread starter jord123
- Start date
Help Support VacuumLand:
jord123
Well-known member
some one said about taking bolts off here but there are no bolts
durango159
Well-known member
I just recently was selling these but have never taken apart the motor housing. I think though that once you remove the screws up top then the top exhaust area should turn to loosen for you to be able to access the Muffler Batting filter inside.
Out of curiosity what is wrong with the unit? That definitely looks like a 360 newer model. Your premotor filter is brand new I see. So with new cones and motor sounding good you would have full power!!
Out of curiosity what is wrong with the unit? That definitely looks like a 360 newer model. Your premotor filter is brand new I see. So with new cones and motor sounding good you would have full power!!
jord123
Well-known member
Thd bearings needs lubrication
blackheart
Well-known member
Oh
After you take those three screws out you should be able to remove the upper portion of the motor housing once you do that there you should be able to see the motor cover and circuit board. You must remove the board in order to take the cover off.
I just took a 75th anniversary apart last week so i could take a look at the motor.
After you take those three screws out you should be able to remove the upper portion of the motor housing once you do that there you should be able to see the motor cover and circuit board. You must remove the board in order to take the cover off.
I just took a 75th anniversary apart last week so i could take a look at the motor.
Similar threads
