bvac6
Well-known member
Does anyone know of anyone that rebristles hoover brush strip?
Brush Re-Bristleing
- Thread starter bvac6
- Start date
Help Support VacuumLand:
massagemiracle
Well-known member
- Joined
- Dec 4, 2010
- Messages
- 1,051
I agree, why wouldn't you just buy new brush strips or bristles for dust or bare floor nozzles? What model and what needs bristles?
bvac6
Well-known member
Model 300, and I don't remember which model I have that they came out of but its the curved single screw type strips as well.
massagemiracle
Well-known member
- Joined
- Dec 4, 2010
- Messages
- 1,051
are you talking about something like these?
marukap
Well-known member
A True Craftsman
I can heartily recommend to you:
Mr. Lance Cheney
Braun Brush Company
43 Albertson Av.
Albertson, NY 11507
www.brush.com
[email protected]
(516) 741-6000
He can rebristle just about any TUFTED brush you have. Send him photos and/or send him the work by mail for an estimate. The results are decidedly better than new-old-stock. You will need to specify bristle type and length. If in doubt, go with longer than shorter. You can always trim them down if need be. Cost VARIES depending on quantity and difficulty. $1.50 per TUFT is not unusual. If your brush strips are the twisted or helical type, you will probably have to send the entire brush roll with them because he will have to use the roll as a mount to hold the work in place.
Hope that helps.
Marty Kaplan
I can heartily recommend to you:
Mr. Lance Cheney
Braun Brush Company
43 Albertson Av.
Albertson, NY 11507
www.brush.com
[email protected]
(516) 741-6000
He can rebristle just about any TUFTED brush you have. Send him photos and/or send him the work by mail for an estimate. The results are decidedly better than new-old-stock. You will need to specify bristle type and length. If in doubt, go with longer than shorter. You can always trim them down if need be. Cost VARIES depending on quantity and difficulty. $1.50 per TUFT is not unusual. If your brush strips are the twisted or helical type, you will probably have to send the entire brush roll with them because he will have to use the roll as a mount to hold the work in place.
Hope that helps.
Marty Kaplan
marukap
Well-known member
A True Craftsman
I can heartily recommend to you:
Mr. Lance Cheney
Braun Brush Company
43 Albertson Av.
Albertson, NY 11507
www.brush.com
[email protected]
(516) 741-6000
He can rebristle just about any TUFTED brush you have. Send him photos and/or send him the work by mail for an estimate. The results are decidedly better than new-old-stock. You will need to specify bristle type and length. If in doubt, go with longer than shorter. You can always trim them down if need be. Cost VARIES depending on quantity and difficulty. $1.50 per TUFT is not unusual. If your brush strips are the twisted or helical type, you will probably have to send the entire brush roll with them because he will have to use the roll as a mount to hold the work in place.
Hope that helps.
Marty Kaplan
I can heartily recommend to you:
Mr. Lance Cheney
Braun Brush Company
43 Albertson Av.
Albertson, NY 11507
www.brush.com
[email protected]
(516) 741-6000
He can rebristle just about any TUFTED brush you have. Send him photos and/or send him the work by mail for an estimate. The results are decidedly better than new-old-stock. You will need to specify bristle type and length. If in doubt, go with longer than shorter. You can always trim them down if need be. Cost VARIES depending on quantity and difficulty. $1.50 per TUFT is not unusual. If your brush strips are the twisted or helical type, you will probably have to send the entire brush roll with them because he will have to use the roll as a mount to hold the work in place.
Hope that helps.
Marty Kaplan
bvac6
Well-known member
It looks like that but more narrow.
hoover28
Well-known member
brush re bristleing
I have used O'connor's for re bristleing some of my hoover strips and 541 brush rolls
and he is very cheap. hoover brush strip sets are 15.00 and brush rolls are 25.00 last time I had them done.
hope this helps,also look at thread # 15225 under vintage.
Chris
I have used O'connor's for re bristleing some of my hoover strips and 541 brush rolls
and he is very cheap. hoover brush strip sets are 15.00 and brush rolls are 25.00 last time I had them done.
hope this helps,also look at thread # 15225 under vintage.
Chris
hoover28
Well-known member
I ment thread # 15256
Chris
Chris
