A second Dial-A-Matic!

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

icee

Well-known member
Joined
Feb 2, 2016
Messages
122
Location
Indiana
I guess I must have a thing now for this age of Hoover.

As the title says, this is now my second dial a matic, this one being the other body style Hoover made. This one is not self propelled, which really I kinda prefer. That being said, while this does have a full set of new brushes, it is fairly heavy to push. The height adjust works just fine; if I put it on the highest setting (shag), it doesn't even reach the carpet, and on the middle (normal) setting, it seems heavy to push. Conventional wisdom would say it's too low, but there really isn't another setting to put it on. It doesn't *sound* to be strained, but I just don't want to damage something like this, ya know?

Anyway, got this for peanuts at a goodwill outlet in surprisingly good mechanical shape. Body needs some TLC but it's nothing too bad. Got it the same day as, ironicly enough, I got a second jet flo lol. But that's for another post!

icee-2017111622013602793_1.jpg

icee-2017111622013602793_2.jpg

icee-2017111622013602793_3.jpg
 
I like the colors! A good cleaning and it will be nice. #7 car polish will work wonders on the paint.
 
"other body style"

Nice DAM.They were way ahead of their time.
There are actually 3 body styles if you count the non Power Drive that has the headlight in the bigger lower front cover.
 
Yes, carpet thickness and the vaccuum's overall weight determine how hard it is to push, especially if it has a strong suction. Early self-propelled machines are usually always pretty heavy to maneuver.

Whenever I turn my Kirby Ultimate G on manual drive, it's like trying to push a wheelbarrow full of concrete up a muddy slope.
 
hoover specials

now i have seen everything A MODEL#28 MADE AS A SPECIALCONSIDERING THAT HOOVER SOPPED REFURBISHING MACHINES IN THE MID 1950S WHAT IDIOT WOULD TRADE IN A LESS THAN 10 YEAR OLD VACUUM GO FIG?
 
#7 polishing compound is a polish for the old car paint that didn't have clear coat. It was once made by DuPont but now just goes by the name #7. It works great on old vacuum and fan paint, it has a slight abrasive to it that gets off the scuffs, light scratches and weathering and shines it up. I usually use this to polish out weathered and scuffed paint, then clean it and go over with an automotive wax.

You may want to try it on an inconspicuous area first to see what happens.

I couldn't find it at most places, but ACE Hardware did have it.
 
Fan of fans

Thanks for the tip, I was literally just looking at it wondering what I could do to clean up its looks a bit
 

Latest posts

Back
Top