Recent content by k15

If anyone is curious I was wrong, the rolled edge is just part of the fan case. I used a hammer and screwdriver to tap it off, it's just friction. Motor runs great now (as good as this cheap Bissell motor can anyway).

I forgot to mention, my plan is to dump the bin straight into the garbage can outside, not a big deal. I can wash the filter in the basement sink.

@panasonicvac thanks for your info and positive post, I'm new to collecting central vacs. I left a pic of the final install. The video you linked to is also the E130A which is the same as my model. I took the motor all apart today and cleaned out the fans, they weren't very dirty. The carbon...

Not many fans of cyclonic systems here, I just finished installing the exhaust outdoors. I like not having to buy bags. Bearings are in excellent shape also. I prefer the bypass motor compared to the flow-thru motor that my Hoover had.

I think I will vent it outside, it shouldn't be that much work. I grew up with a Soluvac, which is a very similar cyclonic system but with no filter whatsoever. There was a pre-motor screen that needed cleaning every couple years.

I just bought a used Electrolux Centralux to replace my low end Hoover. The Hoover does not exhaust outside nor does it have the ability to. Since the Centralux has a tangential bypass motor it can be exhausted outside. My question is, is it necessary? I'd have to run tubing and drill through...

Drawing over the permanent marker with a dry erase marker has helped me in the past, but I'm not sure it'll work for something that has been on there for years or decades.

I should mention both the motor and the brush turn freely by hand, and I added some oil to the motor bearings anyway.

Thanks for the info, not sure why I missed this post earlier. That table is a handy summary. I didn't realize some models had fixed rear wheels. Another question while we're talking about lux PNs, I have a PN6 and the on/off switch seems a bit flaky. It doesn't always turn on, but will if I...

Thanks for the info! I googled Vactronics and that's definitely it. It's pretty powerful, and the power nozzle is really effective.

Was wondering if the experts here could identify this Beaumark vac. Beaumark was the house brand of The Bay in Canada. I know it's a Eureka, and sure looks like an Ironsides. Anyone know the rough age of it? My guess is late 80s early 90s, the model is 98603 and serial is 141008118.

I would agree. I just repacked the bearing in my Electrolux LE, which is decades newer. As long as the bearing has a rubber shield (or perhaps no shield?) it will be possible to clean and repack. I used WD40 to clean the hard grease and dirt out, and then put fresh grease in and popped the...

Sorry to say, but colloidal silver is snake oil bunk, and placebo effects are not evidence. Silver can have some medical uses, but not taken orally. Could silver coated HEPA bags be helpful? Maybe, there'd need to be some scientific evidence before I'd believe it...

Here's the LE I fixed. Cleaned up pretty well. Replacement hose of course.

Hoover Constellations are classic too! They were cool. I should have got pictures but I just picked up a Lux LE from the 80s. It was in rough shape. The owner was running it without a bag I think (the bag switch was gone, and the auto full bag stop was bypassed also). Anyway it sounded horrible...