Beautiful Electrolux G unit on eBay

[johnpaprocki]

Hello guys!

I hope you’re all doing well. I wanted to know what your opinions are on this vacuum cleaner I saw on eBay. It is an Electrolux G unit. Cosmetically I think it is in very good to excellent condition but not yet near mint condition. I have the link below and also showed the pictures below.
https://www.ebay.ca/itm/136492296699?mkevt=1&mkpid=0&emsid=e11021.m164380.l178263&mkcid=7&ch=osgood&euid=c83d0b8a6059414cb2dfbe5c72815f2c&bu=45831868656&ut=RU&exe=0&ext=0&osub=-1~1&crd=20250922030728&segname=11021&recoId=136492296699&recoPos=2

Thank you,
John

 

[rugsucker]

Model G--I use 3 in different areas that only needed -change bag, plug in outlet, turn on switch. Yesterday blue rebuilt G cleaned under furniture, cobwebs in corners and much dusting. eBay G looks very good but the one thing not shown was bag chamber. Not likely that this one was abused but if it is shining like new or has some degree of rust can tell a lot. Very easy with most Electrolux to get bags,hoses and attachments that work well or original.

 

[cheesewonton]

Model G--I use 3 in different areas that only needed -change bag, plug in outlet, turn on switch. Yesterday blue rebuilt G cleaned under furniture, cobwebs in corners and much dusting. eBay G looks very good but the one thing not shown was bag chamber. Not likely that this one was abused but if it is shining like new or has some degree of rust can tell a lot. Very easy with most Electrolux to get bags,hoses and attachments that work well or original.

These use the same Style C dust bag that the modern Aerus Legacy and Classic do, correct? And Aerus now sells a 4 layer synthetic Style C dust bag.

 

[johnpaprocki]

These use the same Style C dust bag that the modern Aerus Legacy and Classic do, correct? And Aerus now sells a 4 layer synthetic Style C dust bag.

It would seem like it.

 

[cheesewonton]

It would seem like it.

Those are paper. Aerus last year finally started to sell a four layer synthetic HEPA Style C dust bag and if you buy them from the Aerus on-line store they are a little less costly per bag than the three layer synthetic Style C bags sold by Perfect, Clean Obsessed and VAC USA. For once a good deal from Aerus.

 

[johnpaprocki]

Model G--I use 3 in different areas that only needed -change bag, plug in outlet, turn on switch. Yesterday blue rebuilt G cleaned under furniture, cobwebs in corners and much dusting. eBay G looks very good but the one thing not shown was bag chamber. Not likely that this one was abused but if it is shining like new or has some degree of rust can tell a lot. Very easy with most Electrolux to get bags,hoses and attachments that work well or original.

Hi Rugsucker,

Thanks again for your tips on the Electrolux G model — it really helped me understand how to evaluate near-mint condition. I especially appreciated your point about the bag chamber and how it can reveal prior use.

I’m also learning that preventing rust is crucial, so I plan to store vacuums in a dry, climate-controlled space, wipe down metal parts, and keep them upright off the floor. I also read in the AP100 manual that for scuffs, it’s best to use a clean cloth with liquid detergent. I imagine this is something most owners don’t do, but it seems like a simple way to preserve the original finish and keep the machine near-mint.

I’d love any tips you’ve learned from working with Electrolux vacuums — even general advice — on keeping them in great condition. Your guidance would be really helpful as I get started with collecting.

Thanks so much!
John

 

[johnpaprocki]

I wonder why such nice machines sometimes do not come with their original attachments. Wouldn’t it make sense if the machine is well kept for then the attachments would be there? Are the hoses leaky? Do the brushes wear out and then owners get rid of the attachments?

 

[huskyvacs]

I wonder why such nice machines sometimes do not come with their original attachments. Wouldn’t it make sense if the machine is well kept for then the attachments would be there? Are the hoses leaky? Do the brushes wear out and then owners get rid of the attachments?

Check the seller's other listings, they likely sold or are selling the tools separately. Also, ask. Usually when people buy these at estate sales or thrift stores the tools are separate from the vacuum an never get seen or bought by different people and separated.

Yes the hoses do dry rot and crack apart and leak, but they can be re-coated with new rubber lining. Theoretically an easy process you can do in your garage but pretty involved technique.

I can assure you vacuums are pretty indestructible and even with absolutely zero care at all they will still last. You might be able to buff the vacuum with some car wax but try it on a small area first.

 

[cheesewonton]

I wonder why such nice machines sometimes do not come with their original attachments. Wouldn’t it make sense if the machine is well kept for then the attachments would be there? Are the hoses leaky? Do the brushes wear out and then owners get rid of the attachments?

It doesn't surprise me. Those old Electroluxes will outlast a couple of sets of attachments if they are used during most vacuuming sessions.

 

[rugsucker]

Attachments--As above some Ebay sellers separate these. With the Mo G hoses would wear(just as tires on a car,etc)and be replaced,the first crevice tool was a bit fragile and were often broken or lost,some use a dusting brush as a scrub brush instead of letting the suction do the work,floor brush bristle strips will wear if used on some concrete or other rough surface floors.Bristles could be replaced on original attachments but most users would replace with genuine or replacement depending on what was convenient. Then there are times that you find extra attachments from older or newer vacs thrown together in a box or closet.

 

[cheesewonton]

Attachments--As above some Ebay sellers separate these. With the Mo G hoses would wear(just as tires on a car,etc)and be replaced,the first crevice tool was a bit fragile and were often broken or lost,some use a dusting brush as a scrub brush instead of letting the suction do the work,floor brush bristle strips will wear if used on some concrete or other rough surface floors.Bristles could be replaced on original attachments but most users would replace with genuine or replacement depending on what was convenient. Then there are times that you find extra attachments from older or newer vacs thrown together in a box or closet.

I still have a Lewyt dusting brush that was left in a dark corner of my parents closet when I was cleaning out their home after they passed. I remember that old Lewyt from when I was a kid. I think I left the Lewyt hose hanger in the service porch closet, something I am kicking myself for now : /

 

[johnpaprocki]

Those are paper. Aerus last year finally started to sell a four layer synthetic HEPA Style C dust bag and if you buy them from the Aerus on-line store they are a little less costly per bag than the three layer synthetic Style C bags sold by Perfect, Clean Obsessed and VAC USA. For once a good deal from Aerus.

Ah, better filtration! That’s definitely a good thing. I didn’t realize Aerus had introduced a 4-layer HEPA bag — sounds like it would really help keep the vacuum clean and working well. I’m mostly trying to preserve my AP200 and eventually hope to find a near-mint AP100, so tips like this are really helpful. Thanks for sharing!

 

[johnpaprocki]

Attachments--As above some Ebay sellers separate these. With the Mo G hoses would wear(just as tires on a car,etc)and be replaced,the first crevice tool was a bit fragile and were often broken or lost,some use a dusting brush as a scrub brush instead of letting the suction do the work,floor brush bristle strips will wear if used on some concrete or other rough surface floors.Bristles could be replaced on original attachments but most users would replace with genuine or replacement depending on what was convenient. Then there are times that you find extra attachments from older or newer vacs thrown together in a box or closet.

That’s helpful info — I’ve never actually used the brushes myself, but it makes sense they’re better for curved or delicate surfaces, letting the vacuum do the work. I can see why using them incorrectly could wear the bristles over time.

 

[johnpaprocki]

Check the seller's other listings, they likely sold or are selling the tools separately. Also, ask. Usually when people buy these at estate sales or thrift stores the tools are separate from the vacuum an never get seen or bought by different people and separated.

Yes the hoses do dry rot and crack apart and leak, but they can be re-coated with new rubber lining. Theoretically an easy process you can do in your garage but pretty involved technique.

I can assure you vacuums are pretty indestructible and even with absolutely zero care at all they will still last. You might be able to buff the vacuum with some car wax but try it on a small area first.

I guess the body really is more indestructible! That makes sense — even after decades, the canister and motor can stay in great shape, while the hoses and attachments take most of the wear and tear. It’s interesting to see which parts last and which show age first