Reply to thread

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

Clean


If you want to clean the water pan.  You fill it up completely with water put dish soap or green clean.  Let it soak about 36 hours.  You can use a higher pressure hose and after you fill and empty a hose should get almost everything off it.

The scuffs don't use alcohol it dries up the sheen on the plastic.  You only use alcohol if disinfecting/sanitizing or removing sticky and permanent marker.  Get a green scrubber or Mr clean pads and wipe it down.

The majority just a wet rag and rinse. 

I've tore apart 3 single speeds a few months ago.  I'm not sure what runs and what doesn't.  I got them for free and figured one should be able to be salvaged.

The 2 versions of the one speed is the motor that is most desirable the 10 amp 12 with power nozzle or the lesser powred one?

Les


Back
Top