Reply to thread

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

[USER=644]@Real1[/USER]


Go to a vac shop, or look on line to purchase a suction/waterlift gauge.  That will tell you how strong the motor is pulling.  But be forewarned, you will get different ratings with the same motors (standard deviation), plus atmospherice pressure will cause differences, plus the amount of voltage coming through the lines will also affect suction. 


Also, consider purchasing a Baird aiflow meter as well.  With this, you now can test for CFM in addition to your suction (inches of lift) with the suction gauge. 


Hope this helps


Back
Top