Electrolux Brush Roll Swap

VacuumLand – Vintage & Modern Vacuum Enthusiasts

Help Support VacuumLand:

human

Well-known member
Joined
Jan 29, 2013
Messages
3,944
Location
Pines of Carolina
So I've had this Electrolux Genesis LXe for the past few months and it just wasn't performing to my standards on my Persian rugs so I turned to eBay for a replacement brush roll. But as I started looking, I remembered the Genesis upright used the same brush roll as a PN5, which I had on a shelf, gathering dust. Further recalling that the PN5 had been a satisfactory performer the last time I used it, I decided to save myself $15-$20 and perform a brush roll swap instead.

It took the better part of an hour, but in the end, I had a double success on my hands. The PN5 brush roll, which has longer, more splayed out bristles, picks up much better in the Genesis, while the Genesis brush roll, with its shorter, stiffer brush roll, puts new life into the PN5. It not only picks up like a champ but it actually pulls itself along on the carpet. It's kind of odd that each machine would work better with the other's brush roll but I'll take it--especially if it doesn't cost me anything.
 
Yeah, it was one of those 'nothing to lose' scenarios. I wasn't using the PN5 so I didn't really care if its performance suffered as long as I could get the Genesis to clean the Persian rugs better. The fact that both improved after the swap is pure gravy.
 

Latest posts

Back
Top