Search results

Office Machine Cleaner I almost forgot about this vacuum. The name says it all. It was sold as a vacuum to service copiers and fax machines, etc. The bag was a super high filtration, yet disposable bag for handling toner in a business environment. 3m had a machine with the same market that...

Early attachment The tool is similar to a tool from my Hoover Senior tool set, although has a different shape. The tool you have looks to be from a sand cast method. Look how rough it is on the inside like it has a sand texture, and the tools are really heavy and thick walled. I would guess...

150 brush strips The brush strips on the original brush are straight. There is a flat spring under each brush strip. On the end of each brush strip, there is an indentation, which you could put a flat blade screwdriver in and push down and push the brush strip toward the pulley or the end cap...

The part number for the board is W10374126 and they are pricey. Only a few on amazon and ebay, most go for around $229.00. The guy also said that there is a $60 core charge. No mention of this on most of the online stores. The board is in the front of the machine on the bottom left...

I gave the model # to my appliance guy. He is checking. I think they had a problem with these boards, but have improved the replacement. I like this machine because of the large load size it can handle, and the fast spin speed. Clothes come out just slightly damp and do not take as long to dry.

Is this a Whirlpool Duet front loading washer? If so, I had to replace the board on mine as well. It would not go through the normal wash cycle. The manual you posted on pics 2 and 3 are for a dryer. The model and serial # are on the inside when you open the door. I recall that you need...

powdercoating My brother has the system by Caswell. They offer all kinds of plating and powdercoating supplies. They have an excellent gloss black. The gloss black on steel, is the easiest powder to apply. When powdercoating aluminum you have way more issues. Especially on thick or large...

bag machine I have the standard Hoover bag machine that is in use every week at our store. I also have a long tube, that I think was designed and manufactured by my grandfather and friend. It is 13 or 14 inches longer than the Hoover tube. It also does not look like it will even fit in the...

Decade 80 cord Be sure to get a cord that is made for the flat handle of your decade. Most cords listed for a Hoover convertible will be for the round handle. The protector that goes into the handle is different between the two.

no attachments But I think I found the a filter cover for your Kenmore upright.

yes it will.

I do have the brand new housings available still. They would run $15 shipped to WA.

Sanitaire bearings The lower bearing (fan end) is likely the one causing the noise. You would remove the belt pulley and fan. Remove the two carbon brush screws to disconnect the lead wires. There are two nuts on the top with lockwashers under them. Once they are taken off the motor top will...

The bearing is a sealed bearing held into the bakelite housing with three rivets going through a metal plate under the bearing. If the bearing is smooth, I would not worry about it. You can remove the rubber shield from the bearing by using a very small and very thin flat blade screwdriver...

midcenturyguy I know you are in jolly ole England, but that car looks alot like a chrysler airflow.

DeSoto Firesweep I have a 66 Dodge Coronet 500 convertible, my brother has a 58 Chrysler Saratoga with a 354 hemi out of a 56 New Yorker. You are probably aware of the website for the Virgil Exner designed Chryslers products called The Forward Look. www.forwardlook.net

spacer parts sent, don't worry about postage, let me know how it works.

509 restoration nice job, was most interested in the buffing process. Not much on that in the videos. Trying to keep your trade secrets? Just wondered what compound you use to get that final buff. Also if you change wheels. Sisal wheel ending with spiral sewn. Compounds= black emory to...

riccar- kenmore- panasonic Good call, Definitely a whirlpool machine, or even a later Panasonic. 3 wire hose that had the rocker switch with 6 terminals. When switched to floor, it would send power back to the canister and power on a relay to turn on the vac motor. must be early riccar to be...

spacer Dax, email me your address and I will mail it out tomorrow. The screw you need is the Phillips head that holds the L shape retainer, that holds in the carbon brush, I believe. I can blow up the picture from the TTI website, hard to tell on your post in the super market section. - Kurt.