Hatsuwr's latest activity

I'll post about it more here when I've made some progress on it, but I'm redoing the entire control circuit. I have an old CV350 that...

Oh, doing that would require swapping out the control board. I wouldn't for two reasons. 1; Chinese made relay/control boards are more...

Do you have any examples of ones that use a soft start? I was planning on incorporating that into mine, and I'm curious how existing...

There are a great many videos you can find on YouTube. Here's the first one I came across, it is turned on at the very end: That's...

A non-subjective comparison between the motors would be pretty difficult without the old one working, but thankfully I am quite familiar...

There is an orifice diameter that will roughly match a system in any configuration you want - hose or not, cleaning head or not. There's...

Unfortunately all of that is still based on a misunderstanding of the performance charts. The ratings are not for unimpeded flow - they...

Thankfully Ametek is pretty transparent about their products. You go to their website, enter the model number into the search box, then...

Guessing it was an internal short that caused it. The motor had a few thousand hours on it, so a good life for a motor of its type and...

Well, prove us wrong then. Eliminate those variables and add some consistency to your measurements and let's see the effects. Obviously...

My central vacuum's rotor burned out, and considering the cost of just a replacement rotor or a similar motor, it made sense to upgrade...

You're still talking about 10%+ difference in cross section just from your orifice estimates. Add in the leaks mentioned earlier and...

1/8" difference could explain a lot of what you are seeing, depending on which side is larger. I don't know how big those ports are, but...

Well if your armature is good and happens to be a 215330, I have a 7.2" motor (115334) that is only missing the armature that I'm giving...

You have the model number of the vacuum/motor? Any idea what the problem with the motor is?